Abstract:High-chloride chemical wastewaters with higher organics concentration and strong causticity,is a great challenge in industrial wastewater treatment. We have investigated the effects of reaction temperatures,residence time,and catalyst Fe2+ content on TOC removal of the wastewater during wet air oxidation,and corrosion characteristics of candidate materials under atmospheres higher 20oC than obtained optimal reaction temperature. On the basis of the above research,a comprehensive treatment process for this wastewater was also built. The results showed that a residence time of 60 min,a reaction temperature of 280℃,and catalyst Fe2+ amount of 100 mg/L was the optimum set of technological parameters for the degradation of the high-chloride chemical wastewater,under which the TOC removal rate was as high as 97.9%. For condition of 300℃,pH=13,nickel alloys(N10276 and N06625)suffered serious corrosion due to trans-passivation dissolution of alloying elements such as chromium and molybdenum in strong oxidizing & alkaline solutions,alkaline dissolution of solid nickel oxides or hydroxides,along with attacks of chloride ions against protective oxides film produced on alloys surface,while surface damage of titanium alloy TA10 also occurred,which mainly derived from strong alkalinity of environmental mediums(pH=13)causing chemical dissolution of the protective titanium oxides. If initial pH value of the corrosion media was adjusted to about 7.5,the corrosion rate of three alloys decreased obviously,and alloy TA10 showed satisfactory corrosion resistance. The economic analysis of wet air oxidation process for the high-chloride chemical wastewater with a capacity of 30 tons per day,indicated that the project total investment is 20.78 million Yuan,while the wastewater processing cost is 470.2 Yuan per ton.

Effect of inorganic salt on the removal of typical pollutants in wastewater by RuO 2 /TiO 2 via catalytic wet air oxidation

Catalytic Ozonation with Carbon-Coated Copper-based Core-shell Catalysts (C/Cu-Al2O3) for the Treatment of High-Salt Petrochemical Wastewater

[Ru/ac Catalyzed Ozonation of Recalcitrant Organic Compounds].

Wet Oxidation of Wastewater Containing Organic Acids over TiO2 Supported Noble Metal Catalyst

Singlet oxygen-dominated electrocatalytic oxidation treatment for the high-salinity quaternary ammonium compound wastewater with Ti/(RuxIry)O2 anode

Electrochemical catalytic oxidation treatment of highly saline organic wastewater in coal chemical industry

Catalytic Ozonation of Reverse Osmosis Concentrate from Coking Wastewater Reuse by Surface Oxidation over Mn-Ce/γ-Al2O3: Effluent Organic Matter Transformation and Its Catalytic Mechanism

Research on wet air oxidation of high-chloride chemical wastewaters and economic analysis

STUDY ON DEVELOPING WASTEWATER PRETREATMENT BY CATALYTIC WET AIR OXIDATION

Preparation of RuO2/γ-Al2O3 Catalysts and Study on Catalytic Wet Air Oxidation of Phenol

Catalytic Wet Air Oxidation for the Treatment of Emulsifying Wastewater

Catalytic Wet Air Oxidation Treatment of Oily Wastewaters

Catalytic wet air oxidation of phenol over RuO2/gamma-Al2O3 catalyst

Microwave Assisted Catalytic Wet Air Oxidation of H-acid in Aqueous Solution under the Atmospheric Pressure Using Activated Carbon As Catalyst

Excellent performance of electro-assisted catalytic wet air oxidation of refractory organic pollutants

Catalytic wet air oxidation of high-strength organic coking wastewater

Wet air oxidation of epoxy acrylate monomer industrial wastewater.

Effects of TiO_2,ZrO_2,and Ti_(0.5)Zr_(0.5)O_2 as Supports on Wet Oxidation Performances of Ru Catalyst

Pretreatment of Apramycin Wastewater by Catalytic Wet Air Oxidation.

Mechanism and Toxicity Evaluation of Catalytic Ozonation over Cu/Ce–Al2O3 System Aiming at Degradation of Humic Acid in Real Wastewater

High-efficiency catalytic wet air oxidation of high salinity phenolic wastewater under atmospheric pressure in molten salt hydrate media