Abstract:While flow-through anodic oxidation (FTAO) technique has demonstrated high efficiency to treat various refractory waste streams, there is an increasing concern on the secondary hazard generation thereby. In this study, we developed an integrated system that couples FTAO and cathodic reduction processes (termed FTAO-CR) for sustainable treatment of chlorine-laden industrial wastewater. Among four common electrode materials ( i.e. , Ti 4 O 7 , β -PbO 2 , RuO 2 , and SnO 2 -Sb), RuO 2 flow-through anode exhibited the best pollutant removal performance and relatively low ClO 3 and ClO 4 yields. Because of the significant scavenging effect of Cl − in real wastewater treatment, the direct electron transfer process played a dominant role in contaminant degradation for both active and nonactive anodes though active species ( i.e. , active chlorine) were involved in the subsequent transformation of the organic matter. A continuous FTAO-CR system was then constructed for simultaneous COD removal and organic and inorganic chlorinated byproduct control. The quality of the treated effluent could meet the national discharge permit limit at low energy cost (~4.52 kWh m 3 or ~0.035 kWh g 1 -COD). Results from our study pave the way for developing novel electrochemical platforms for the purification of refractory waste streams whilst minimizing the secondary pollution. Environmental Implications Industrial wastewater usually features high organic matter content and complex composition, posing a significant environmental risk. While anodic oxidation has demonstrated high efficiency, there is increasing concern on the secondary hazard generation thereby. An energy-efficient system coupling flow-through anodic oxidation and cathodic reduction processes is therefore proposed, achieving simultaneous organic contaminant removal and chlorinated byproduct control. The direct electron transfer process imparts an advantage in treating chlorine-laden wastewater compared to the • OH-based advanced oxidation counterparts. The results of this study pave the way for developing novel electrochemical platforms for the purification of refractory waste streams whilst minimizing the secondary pollution.

Efficient Treatment of High-Concentration Sulfurous Wastewater by Using Electrochemical Oxidation Process with Ti/SnO2–Sb Anode and Air Cathode

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

Electrochemical Removal of Hydrogen Sulfide and Recovery of the Deposited Sulfur on the Anode from Wastewater

Insight into the Effective Electrocatalytic Sulfide Removal from Aqueous Solutions Using the Surface Oxidized Stainless-Steel Anode and Its Desulfurization Mechanism

ELECTROCHEMICAL TREATMENT OF RECIRCULATING AQUACULTURE WASTEWATER USING A Ti/RuO2-IrO2 ANODE FOR SYNERGETIC TOTAL AMMONIA NITROGEN AND NITRITE REMOVAL AND DISINFECTION

Electrochemical catalytic oxidation treatment of highly saline organic wastewater in coal chemical industry

Base-metal Oxide Semiconductor Electrodes for PPCP Degradation: Ti-doped Α-Fe2o3 for Sulfosalicylic Acid Oxidation As an Example.

Treatment of Tannery Wastewater by Electrochemical Oxidation Process

Treatment of Organic Wastewater by a Synergic Electrocatalysis Process with Ti3+ Self-Doped TiO2 Nanotube Arrays Electrode As Both Cathode and Anode.

STUDY ON THE ELECTROCHEMICAL OXIDATION TREATMENT OF COKING WASTEWATER BY DSA ANODE

Treatment of Slaughterhouse Wastewater by Electro-Assisted Fe(Ⅱ)+activated Disodium Peroxodisulfate Process

Transforming coking wastewater: Breakthrough COD reduction with Ti/RuO 2 -IrO 2 anode electrocatalysis

Persulfate enhanced electrochemical oxidation of highly toxic cyanide-containing organic wastewater using boron-doped diamond anode

Degradation performance of Ti based SnO 2 anode on coal chemical industry wastewater

Removal of chemical oxygen demand and ammonia nitrogen from high salinity tungsten smelting wastewater by one-step electrochemical oxidation: From bench-scale test, pilot-scale test, to industrial test

Removal of chemical oxygen demand and ammonia nitrogen from lead smelting wastewater with high salts content using electrochemical oxidation combined with coagulation–flocculation treatment

Simultaneous removal of chemical oxygen demand, turbidity and hardness from biologically treated citric acid wastewater by electrochemical oxidation for reuse

ELECTROCATALYTIC DEGRADATION OF HIGH SALINITY METHYL ORANGE WASTE WATER BASED ON Ti/SnO2-Sb ANODE-AIR DIFFUSION CATHODE

Development of a Three-Dimensional Electrochemical System Using a Blue TiO2/SnO2-Sb2O3 Anode for Treating Low-Ionic-Strength Wastewater.

Low-voltage Electrochemical Treatment to Precipitate Sulfide During Anaerobic Digestion of Beet Sugar Wastewater.

Energy-efficient Treatment of Refractory Industrial Effluent Using Flow-through Electrochemical Processes: Oxidation Mechanisms and Reduction of Chlorinated Byproducts