Abstract:High-chloride chemical wastewaters with higher organics concentration and strong causticity,is a great challenge in industrial wastewater treatment. We have investigated the effects of reaction temperatures,residence time,and catalyst Fe2+ content on TOC removal of the wastewater during wet air oxidation,and corrosion characteristics of candidate materials under atmospheres higher 20oC than obtained optimal reaction temperature. On the basis of the above research,a comprehensive treatment process for this wastewater was also built. The results showed that a residence time of 60 min,a reaction temperature of 280℃,and catalyst Fe2+ amount of 100 mg/L was the optimum set of technological parameters for the degradation of the high-chloride chemical wastewater,under which the TOC removal rate was as high as 97.9%. For condition of 300℃,pH=13,nickel alloys(N10276 and N06625)suffered serious corrosion due to trans-passivation dissolution of alloying elements such as chromium and molybdenum in strong oxidizing & alkaline solutions,alkaline dissolution of solid nickel oxides or hydroxides,along with attacks of chloride ions against protective oxides film produced on alloys surface,while surface damage of titanium alloy TA10 also occurred,which mainly derived from strong alkalinity of environmental mediums(pH=13)causing chemical dissolution of the protective titanium oxides. If initial pH value of the corrosion media was adjusted to about 7.5,the corrosion rate of three alloys decreased obviously,and alloy TA10 showed satisfactory corrosion resistance. The economic analysis of wet air oxidation process for the high-chloride chemical wastewater with a capacity of 30 tons per day,indicated that the project total investment is 20.78 million Yuan,while the wastewater processing cost is 470.2 Yuan per ton.

Catalytic oxidative treatment of wastewater containing H acid with chlorine dioxide

Enhanced Conversion from H2O2 to 1O2 on Cu–N Centers: Investigation of Mechanisms and Application in Alkaline Wastewater Treatment

Study of the Catalytic Oxidation of PTA Wastewater with Chlorine Dioxide as Oxidant

Study on Catalysis Oxidation Treatment of Dye Intermediate Wastewater of C Acid

Catalytic Oxidation Treatment of PTA Wastewater by Chlorine Dioxide

Treatment of H Acid Wastewater by Catalytic Oxidation with Supported Catalyst

Advanced treatment of dyeing wastewater using catalytic ozonation process

Experimental Study on Advanced Treatment of Coal Chemical Wastewater by Catalytic Ozonation

Catalytic Oxidation-A New Treatment Technology for High Concentration Organic Chemical Wastewater

Catalytic Ozonation Advanced Treatment of Pulping Effluent Catalyzed by γ-Al2 O3 Loaded with Binary Metal Oxides

Research on wet air oxidation of high-chloride chemical wastewaters and economic analysis

Mechanism and Toxicity Evaluation of Catalytic Ozonation over Cu/Ce–Al2O3 System Aiming at Degradation of Humic Acid in Real Wastewater

Study on Wastewater Treatment of Rubber Accelerator by Catalytic Oxidation of Chlorine Dioxide

Catalytic Wet Air Oxidation of Ochlorophenol in Wastewater

Research on catalytic ozonation for advanced treatment of coking wastewater

STUDY ON THE CATALYTIC OXIDATION OF WASTEWATER CONTAINING PHENOL WITH CHLORINE DIOXIDE AS OXIDANT

Treatment of Chemical Industrial Wastewaters by Catalytic Oxidation with Activated Carbon—Hydrogen Peroxide

Pretreatment of Wastewater in Amine C Acid Manufacture by Coagulation-Catalytic Oxidation

Treatment of Coking Wastewater by Heterogeneous Catalytic Oxidation Process

Degradation of Azo Dyes Wastewater Using Chlorine Dioxide and A Ternary Catalyst NiO-CuOx-La2O3/Al2O3

Catalytic Ozonation of Industrial Wastewater Containing Chloro and Nitro Aromatics Using Modified Diatomaceous Porous Filling