Abstract:The precise extraction of a thin slice (lamellae) from nano electronic devices using a focused ion beam (FIB) is crucial for transmission electron microscopy analysis, but it remains a challenge for 100 nm and beyond scale device components. In this study, we introduce a new method that utilizes the device's own features as markers during FIB thinning process by continuously monitoring the intermediate structures with secondary electron scanning electron microscopy (SE-SEM) imaging. This allows for the targeted extraction of the desired device component with high precision. We successfully demonstrate the effectiveness of this approach by extracting lamellae from 100 nm length channel in arrayed carbon nanotube film field-effect transistors using FIB lift-out. Lay Description: In today's semiconductor industry, nanoscale and even atomic-scale investigation of the processing and product quality of nanodevices is essential, for which the combination of focused ion beam (FIB) and transmission electron microscope (TEM) is a commonly used tool. A key requirement is to ensure the TEM examined device components are precisely defined during the FIB process, which is becoming a challenge particularly for 100 nm scale (and beyond) nanodevices. In this study, the authors propose and further demonstrate a self-marked method that enables the feasibility of extracting sub-100 nm components of nanodevices (using the state-of-the art carbon nanotube transistor as a demo) using FIB, by continuously monitoring intermediate structures with secondary electron scanning electron microscopy (SE-SEM) imaging. This article is protected by copyright. All rights reserved.

Fabrication of micro DOE using micro tools shaped with focused ion beam

Reactive ion beam etching for diffractive optical elements

Microfabrication Assisted by Laser-Trapped Microparticle Tools

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Self-marked preparation of site-specific transmission electron microscope lamellae of nanodevices using focusing ion beam technique.

Theory and Method of Microstructure Doe As Substitution for Aspheric Surface

Focused Ion Beam Assisted Interface Detection for Fabricating Functional Plasmonic Nanostructures

A Study on Focused Ion Beam (FIB) Milling Machining and Fabrication Technology of Nano-Scale Diamond Tool for Machining Fine-Patterns in a Free-Form Surfaces

Focused-ion-beam stress introducing technology for micro/nano-fabrications

A New Diamond Machining Approach for Extendable Fabrication of Micro-Freeform Lens Array

Research On A New Approach For The Fabrication Of Diffractive Optical Elements By Means Of Rotating Digital Mask

End-to-End Design of Diffractive Optical Elements Fabricated by Direct Laser Writing Lithography

Additive manufacturing of solid diffractive optical elements via near index matching

Fabrication Methods and High-Precision Diameter Control Techniques of Optical Micro-/Nanofibers

Rapid Focused Ion Beam Milling Based Fabrication of Plasmonic Nanoparticles and Assemblies Via "sketch and Peel" Strategy.

Dry‐etching‐assisted Femtosecond Laser Machining (laser Photonics Rev. 11(3)/2017)

Large-Area and High-Precision Milling of Focused Ion Beam Based on the Integration of Nanoscale Machine Vision and Compensation Control

Dry-etching-assisted femtosecond laser machining

Near index matching enables solid diffractive optical element fabrication via additive manufacturing

Laser Nanofabrication: Applications in Micro-Optics, Micro-Electronics, Micromachines, and Microfluidics

Nanostructuring Optical Waveguides by Focused Ion Beam Milling. Near-Field Characterization