Abstract:The measuring of the depth profile and electrical activity of implantation impurity in the top nanometer range of silicon encounters various difficulties and limitations, though it is known to be critical in fabrication of silicon complementary metal–oxide–semiconductor (CMOS) devices. In the present work, SRIM program and photocarrier radiometry (PCR) are employed to monitor the boron implantation in industrial-grade silicon in an ultra-low implantation energy range from 0.5 keV to 5 keV. The differential PCR technique, which is improved by greatly shortening the measurement time through the simplification of reference sample, is used to investigate the effects of implantation energy on the frequency behavior of the PCR signal for ultra-shallow junction. The transport parameters and thickness of shallow junction, extracted via multi-parameter fitting the dependence of differential PCR signal on modulation frequency to the corresponding theoretical model, well explain the energy dependence of PCR signal and further quantitatively characterize the recovery degree of structure damage induced by ion implantation and the electrical activation degree of impurities. The monitoring of nm-level thickness and electronic properties exhibits high sensitivity and apparent monotonicity over the industrially relevant implantation energy range. The depth profiles of implantation boron in silicon with the typical electrical damage threshold (Y ED) of 5.3 × 1015 cm−3 are evaluated by the SRIM program, and the determined thickness values are consistent well with those extracted by the differential PCR. It is demonstrated that the SRIM and the PCR are both effective tools to characterize ultra-low energy ion implantation in silicon.

The Mean Projected Range and Range Straggling of Xe Ions Implanted in Si and Si1N1.375H0.603

Distributions of Implanted Fe Ions in Quartz Crystal and Silicon

Range Profiles of Xe+ and Xe-2+ of Energy 50 to 400 Kev in Quartz Crystal

Range Profiles of 50 to 400 Kev Xenon Ions in a Silicate Glass

Stopping power for MeV energy Au ions in silicon 1 Supported by the Analytic and Measuring Foundatio

Range Profiles of 50 to 400 Kev Hg+ in Quartz Crystal

Molecular Dynamics Simulations of Ion Range Profiles for Heavy Ions in Light Targets

Angular Distribution and Recoil Effect for 1mev Au+ Ions Through a Si3N4 Thin Foil

Ion Distribution and Electronic Stopping Power for Au Ions in Silicon Carbide

Variation of TiO2/SiO2 mixed layers induced by different Xe+ ion energies

Evolution of secondary defects in arsenic implanted Si

Study Of The Na-Si(111) 3x1 Interface Using Core-Level Photoemission Spectroscopy

Measurement and Simulation of Ultra-Low-Energy Ion-Solid Interaction Dynamics

Effects of Ion Channeling and Co-Implants on Ion Ranges and Damage in Si: Studies With PL, SRP, SIMS and MC Models

Electronic Stopping Powers for Heavy Ions in Silicon

Ion implantation into Si covered by HfO2 or SiO2 film

Investigations on ion irradiation induced strain and structural modifications in 3C–SiC

Interplay of ballistic and chemical effects in the formation of structural defects for Sn and Pb implanted silica

Differential Nonlinear Photocarrier Radiometry for Characterizing Ultra-Low Energy Boron Implantation in Silicon

Simulation On Low Energy Ion Implantation Into Ge And Sige With Molecular Dynamics Method

Electron Impact Collision Strengths in Si IX, Si X, and Si XI