Abstract:This paper investigates the DC pollution flashover performance of large-size suspension composite insulator and ±800 kV post composite insulator by vast artificial contamination tests in actual high altitude area. Pollution flashover voltages under different SDDs (Salt Deposit Distribution) of two kinds of insulators are obtained. Two on-load voltage methods are used in the artificial contamination test, rise-voltage method and up-and-down method. Test results indicate that, firstly the DC pollution flashover voltages of suspension insulator obtained by rise-voltage method are general higher than the results of up-and-down method. But the influences of SDD on flashover performance of two on-load voltage methods are different. Secondly, the average maximum value of leakage currents for post composite insulators increases as SDD, while, the time when maximum value of leakage current occurred shortens as SDD increasing in up-and-down tests. Thirdly, by ultra violet (UV) camera observation, the partial discharge of top section is more severe than other parts for large-size post composite insulators. Finally, experimental research shows that the DC pollution flashover voltages and the length of post composite insulators are accord with good linear relationship while the distance of installation from ground level shows on significant influence on the DC pollution flashover voltages. According to the above conclusions, this work have enriched the research of pollution flashover characteristics of outdoor insulation in actual high altitude area and can provide technical support for the external insulation design, operation and maintenance of ±800 kV Ultra High Voltage (UHV) DC transmission projects in high altitude area in China.

Characteristics of Contamination of Insulator in the Coastal Transmission Line

Mechanism of contaminant accumulation and flashover of insulator in heavily polluted coastal area

Pollution Flashover Characteristics of the Insulators Of±800 Kv HVDC Lines under High Altitude Areas

Study on the Contamination Distribution Along ±500k VDC Composite Insulator

Analysis On Flashover Performance Of Polluted Porcelain Insulators In High Conductivity Fog Environment

Research status of the external insulation pollution flashover of high voltage transmission line

Influence of Pollution on Surface Streamer Discharge

Equivalent Investigation of Natural Contamination and Artificial Contamination Test

Effects of Asymmetrical Algal Distribution on the AC Flashover Characteristics of Bio-Contaminated Silicone Rubber Insulators

Calculation and Analysis of Pollution Flashover Voltage of Porcelain Insulator in Transmission Line under Overheavy Pollution Environment

Study on methods of preventing pollution flashover and wet flashover for 750 kV lines in high altitude area

Temporal and spatial characteristics of soluble salt components accreted on the insulator surface

Study on Flashover Performance of Post Insulator for 750 Kv Transformer Substation in High Altitude Area

Effects of Natural Contamination Components on the Surface Conductivity under Saturated Moisture

Development of Contamination Flashover Pre-Warning System and Analysis of Operating Experience

DC Pollution Resistance Performance of Composite Insulators in High Altitude

Flashover Performance of Long-String Insulators of DC Power Transmission Line at High Altitude

Research on pollution flashover characteristics of large-size composite outdoor insulation for UHV DC in high altitude area

Influence of Contaminated Location on Streamer Discharge

Investigation on Altitude Correction Factor of Flashover Voltage of Porcelain Insulator for DC Transmission Lines