Abstract:The colloidal forming process based on gel-casting was applied for preparing microbeads of ceramics, improving the breakdown strength of rutile capacitor, developing the thin-wall rutile tube for ozone generator, and producing the refractory nozzle of zirconia (ZrO2) and lead zirconate titanate (PZT). The microbeads of ceramics were used as grinding media, gel-pen-ball and healthcare product with far infrared function for human body. Owing to the low-cost associated with the production of the gel-beads as well as because of its superior properties, they have been widely used and marketed.When compared with the extrusion forming, the breakdown strength of rutile capacitor prepared by gel-casting was improved greatly. The rutile ceramics with high dielectric constant and high breakdown strength have been used in thin-wall tube of ozone generator.ZrO2 refractory nozzle prepared by gel-casting has a high melting point above 2680 degrees C and a good thermal shock resistance to withstand the temperature rising from the room temperature to 2200 degrees C in several seconds. Hence, it is considered as a suitable material for making the nozzle for precision casting of Cu-Cr molten alloy.When compared with die pressing, gel-casting can provide a more homogenous microstructure as well as better piezoelectric property of the PZT samples. By using the same sintering procedure, gelcast samples were observed to exhibit slightly stronger piezoelectric effects than the die pressed ones. This may be attributed to both density difference and pore size.

Application of Gelcasting to the Fabrication of Piezoelectric Ceramic Parts

Water based gelcasting of lead zirconate titanate

Gelcasting of PZT

Rapid Prototyping of Piezoelectric Ceramics Via Selective Laser Sintering and Gelcasting

Anti-crack machining of PZT ceramics for fabricating piezocomposites by using gelcasting technique

Gelcasting Based Solid Freeform Fabrication of Piezoelectric Ceramic Objects

Recent Developments in Gelcasting of Ceramics

Improved Gelcasting

Investigation of the Additive Induced Doping Effects in Gelcast Soft Lead Zirconate Titanate Ceramics

Application Of New Colloidal Forming

Fabrication of complicated ceramic parts by gelcasting based on additive manufactured acetone-soluble plastic mold

Enhanced Piezoelectric Properties of PZT Ceramics Prepared by Direct Coagulation Casting Via High Valence Counterions (DCC–HVCI)

Gelcasting of alumina suspension using gellan gum as gelling agent

Preparation of porous ceramics by gelcasting approach

Study On Gel-Tape Casting In The Mixed Polyvinyl Alcohol And Acrylamide Systems

Rheological Properties and Gelcasting Behavior of Ultrafine Zro2 Suspension

Research and Development of New Gel-Casting Technology for Structural Ceramics

Gel-Casting Of Fused Silica Ceramic And Its Sintering Process

Formation of Silicon Nitride Bonded Silicon Carbide by Aqueous Gelcasting

Processing and properties of porous PZT ceramics from particle-stabilized foams via gel casting

Research Progess in Ceramic Gelcasting Process