Abstract:In the present work, effects of ZrC addition (10, 15, 20, 25 vol%) on microstructure and mechanical properties of ZTA20mol% (Zirconia-20mol% Toughened Alumina) ceramic composites were investigated. Samples were prepared by Hot Pressing Sintering (HP) at 1 600 ℃ and 30 MPa for a soaking time of 2 hours. Microstructures were characterized by XRD, Raman, SEM and TEM. XRD and Raman spectra results revealed that only ZrC, α-Al2O3 and ZrO2 were detected for all composites, indicating that these ceramic composites had excellent chemical compatibilities. SEM images showed refined microstructure was obtained, and the fracture surfaces exhibited a mixed process of transgranular and intergranular fracture. According to the TEM observations, some nano-sized ZrC particles dispersed inside Al2O3 grains and formed an intra/inter-type nanostructure. The relative densities and Vickers hardness were inversely proportional to ZrC content, which gradually decreased from 98.24% to 94.89%, from 1 847 to 1 691 HV1, respectively. Flexural strength and fracture toughness were tested by three-point bending method and single-edge notched beam method, respectively. The fracture toughness increased at first and then decreased with ZrC content increased from 0 to 25 vol%. The maximum value was 11.23 MPa.m1/2 with 20 vol% ZrC addition, with an enhancement of 51% compared to the undoped ZTA mixture. The flexural strength, with a maximum of 1 121 MPa without ZrC addition and decreased to 645MPa with ZrC-10(vol%) addition, then increased monotonously to 1084 MPa as the ZrC content increased from 10 to 25 vol%.

The effects of multiwalled carbon nanotubes on the hot-pressed 3 mol% yttria stabilized zirconia ceramics

Technologies and properties investigations of CNTs reinforced 3Y-ZrO2 ceramics with hot-pressing sintering

Effect of Multiwall Carbon Nanotubes on Electrical and Dielectric Properties of Yttria‐Stabilized Zirconia Ceramic

Toughening effect of multiwall carbon nanotubes on 3Y-TZP zirconia ceramics at cryogenic temperatures

Zirconia-based Nanocomposite Toughened by Functionalized Multi-Wall Carbon Nanotubes

Effect of carbon nanotubes on the properties of ZrB2–SiC ceramics

Effects of ZrC content on the microstructure and mechanical property of ZrC/ZTA composites consolidated by hot pressing

Enhanced Toughness of KZr2(PO4)3 Ceramics Via Hydrothermal Incorporation of Multi-Walled Carbon Nanotubes

Mechanical and Electrical Properties of Chemically Modified MWCNTs/3Y-TZP Composites

Effects of Nanotube Dispersion on Tribological Behavior of Multi-walled Carbon Nanotube/Epoxy Resin Composite

The effects of carbon nanotubes on electroactive shape-memory behaviors of hydro-epoxy/carbon black composite

Effects of Multi-Walled Carbon Nanotubes on Char Residue and Carbothermal Reduction Reaction in Ethylene Propylene Diene Monomer Composites at High Temperature

Study on toughening effect of zirconia nanocomposites

Microstructure and Mechanical Property of Zirconia Nanocomposites

Microstructure and Mechanical Properties of Piezoelectric Materials Toughening Multi-walled Carbon Nanotubes/Hydroxyapatite Biocomposites

Effects of MWCNTs characteristics on microstructure and properties of MWCNTs/Al composites

Microstructural Evolution and Mechanical Properties of Carbon Nanotubes–reinforced TZM Composites Synthesized by Powder Metallurgy

High temperature deformation mechanisms in monolithic 3YTZP and 3YTZP containing single wall carbon nanotubes

Failure investigation of carbon nanotube/3Y-TZP nanocomposites

Effect of Multi-Walled Carbon Nanotubes on the Properties of Polyoxymethylene

Effects of Y2O3 on microstructure and mechanical properties of ZrB2–SiC ceramics