Abstract:Power consumption and scaling the performance and quantity of electrical interconnects for data traffic inside boards and backplanes are one of the critical barriers envisaged in next‐generation Data Center (DC) and High‐Performance Computing (HPC) applications. In this paper, we report developments of electro-optical PCBs (EO-PCB) with embedded polymer waveguide layers. We show results for fabricating realistic product emulator test vehicles that comprise of reasonable form factor PCBs with optical and electrical layers. The optical layer comprise of multiple waveguides exhibiting a full range of geometric configurations required to meet practical optical routing functions. Test patterns include varied cross-sectional sizes, 90° bends of varying radii (40mm – 2mm), cascaded bends with varying radii, waveguide crossings with varied crossing angles (90° - 20°), splitters, tapered waveguides and waveguide interconnect to midboard interface slots. Moreover, results for fabricating electrical interconnect structures (e.g. tracing layers, vias, plated vias) top/bottom and through optical layers in OE-PCB stack are shown. The purpose of the complex routed copper layers is to enable the crucial demonstration of the fabrication and thermal robustness challenges inherent to electro-optical PCBs with optical layers. Process compatibility with accepted practices and challenges in production scale up for high volumes are key concerns to meet the yield target and cost efficiency. Results include waveguide characterization, waveguide transmission loss, misalignment tolerance, and effect of lamination. Moreover, we show results on waveguide termination by in-plane edge connector and with 90° out-of-plane couplers.

Resonance Suppression of Grounded Coplanar Waveguide in Submount for 40 Gb/s Optoelectronic Modules

Grounded Coplanar Waveguide with Via Holes for High-speed Integrated EA Modulator/DFB Laser Module

High-Frequency Modeling and Optimization of E/O Response and Reflection Characteristics of 40 Gb/S Eml Module for Optical Transmitters

Electro-Optic Silicon Modulator With Horizontal Photonic Crystal Slot Slab

Resonance Property of a Novel Vertical Substrate Integrated Waveguide

High-Speed Coplanar Waveguide Based Submount for 40 Gbit/s Electroabsorption Modulator

Bing Xiong, Jianbo Tian, Jian Wang, Pengfei Cai, Changzheng Sun

Design and Improvement of InP-based Traveling Wave Mach-Zehnder Modulator for Monolithic Integrated with V-cavity Laser

Efficient Coupling of Evanescent Waves in Rectangular Waveguides Based on Ultrathin Planar Capacitive Metasurfaces

Novel Low-Cost Wideband Si-Based Submount for 40 Gb/S Optoelectronic Devices

A Wideband Electro-Optic Modulator Based on Long Range Surface Plasmon Resonances

Fabrication and Packaging of 40-Gb/s AlGaInAs Multiple-Quantum-Well Electroabsorption Modulated Lasers Based on Identical Epitaxial Layer Scheme

Fabrication and characterization of Spin on Glass/HR-silicon Substrates for mmWave Applications

Development of Electro-Optical Pcbs with Embedded Waveguides for Data Center and High Performance Computing Applications

Performance Improvement of 40-Gb/s Electroabsorption Modulator Integrated Laser Module with Two Open-Circuit Stubs

Microwave Packaging for 10-Gb/s EML Modulators

Low-crosstalk Laser-Direct-writing FI/FO Device for 8×100-Gbps Optical Interconnection

Gain-Coupled 4×56 Gb/s EML Array with Optimized Bonding-Wire Inductance

Design, Fabrication, and Radio Frequency Property Evaluation of a Through-Glass-via Interposer for 2.5D Radio Frequency Integration

Ultra-low-loss optical interconnect enabled by topological unidirectional guided resonance

Ultralow-loss optical interconnect enabled by topological unidirectional guided resonance