Abstract:Weakly-coupled mode division multiplexing (MDM) technique is a promising candidate for capacity enhancement of short-reach optical interconnections, for which the multiple-ring-core few-mode fiber (MRC-FMF) has been proven to be an effective design method to suppress distributed modal crosstalk. Similar to low chromatic-dispersion (CD) O-band transmission based on single-mode fibers (SMF), all the mode channels in a weakly-coupled FMF for short-reach applications should achieve low CD to support intensity-modulation/direct-detection (IM/DD) transmission. In this paper, we propose, for the first time to the best of our knowledge, an index perturbation method to adjust both effective index and CD of each mode in an MRC-FMF. Firstly, an accurate modeling method to model the relationship between SiO-GeO material index and the germanium concentration at different wavelengths is proposed by analyzing the index characteristics of 4 kinds of germanium-doped fused silica SMFs at the same fabrication processing, which could be utilized to calculate the CD characteristics for an MRC-FMF with perturbed index profile. Then, based on the perturbation method considering the influences on both effective index and CD, a weakly-coupled low-CD MRC-FMF supporting 4 linearly-polarized (LP) modes is designed and fabricated. The measured minimum effective index difference min|Δn| among all modes is larger than 1.3 × 10, and the CD values of all the modes lie between -6 and +6 ps/km/nm ranging from 1280 to 1320 nm, which agree well with the design. The 2-km transmission experiment indicates that the fabricated MRC-FMF could support stable digital-signal-processing (DSP)-free IM/DD transmission for all the 4 LP modes. This work is beneficial to the application of short-reach weakly-coupled MDM systems.

Low-crosstalk Laser-Direct-writing FI/FO Device for 8×100-Gbps Optical Interconnection

200 Gb/s Optical-Amplifier-Free IM/DD Transmissions Using a Directly Modulated O-Band DFB+R Laser Targeting LR Applications

Net 8×250 Gbit/s/λ PAM6/8 Optical Interconnect Over High-Density Eight-Core Fiber and Low-Crosstalk Laser Direct Writing FI/FO Devices

Spacing-Tailored Multicore Fiber Interface for Efficient FIFO Devices

Design and Optimization of Multi-core Fibers with Low Crosstalk and Large Effective Area

Low-Latency and High-Speed Hollow-Core Fiber Optical Interconnection at 2-Micron Waveband

Ultra-compact high efficiency and low crosstalk optical interconnection structures based on inverse designed nanophotonic elements

Enabling Technologies to Achieve Beyond 500gbps Optical Intra-connects Based on WDM Visible Light Laser Communication

Soft-Lithography-Based Inter-Chip Optical Interconnects

Low-cost 60-GHz radio-over-fiber architecture compatible with wavelength-division-multiplexing passive optical networks by employing directly modulated laser and frequency quadruple techniques

Weakly-coupled 7-core-2-LP-mode transmission using commercial SFP + transceivers enabled by all-fiber spatial multiplexer and demultiplexer.

Interleaved Single-Carrier Frequency-Division Multiplexing for Optical Interconnects.

Low loss fiber-coupled volumetric interconnects fabricated via direct laser writing

Weakly-coupled 4-Mode Step-Index FMF and Demonstration of IM/DD MDM Transmission.

Wavelength-interleaved MDM-WDM Transmission over Weakly-Coupled FMF.

Weakly-coupled Real-Time SDM Technology for Short-Reach Optical Transmission

A low crosstalk seven-core five-mode fiber for high density transmission and large capacity communication

Low-CD weakly-coupled FMF for short-reach IM/DD MDM transmission.

MIMO-free 20-Gb/sx4x2 WDM-MDM Transmission over 151.5-km Single-span Ultra Low-Crosstalk FMFs

A 6-LP-mode ultralow-modal-crosstalk double-ring-core FMF for weakly-coupled MDM transmission