Abstract:Accuracy of many scientific experiments and industrial applications could benefit from the most accurate optical frequency combs, which, however, are typically located only in a few dedicated metrology laboratories. Distribution of these highly‐stable combs is suggested beyond these dedicated laboratories using hollow core fibers, which is shown to preserve the combs' stability better than today‐mainstream optical fibers. Over the last two decades, optical frequency combs (OFCs) have enabled some of the most accurate measurements in physics. Distributing light from OFCs via optical fibers could make these high‐accuracy measurement tools available more widely, from a few dedicated metrology laboratories to other laboratories and industry. However, the performance of distributed OFCs is strongly limited by impairments of standard single mode fiber (SMF), most notably its thermal sensitivity of chromatic dispersion, for which no compensation technique has been shown to date. To overcome this limitation, use of a new class of optical fiber is suggested here: a hollow core fiber (HCF), which offers more than an order of magnitude lesser such impairment. The measured OFC frequency stability of the optical mode and mode spacing reaches 1.8 × 10−19 and 1.5 × 10−17 at a few thousand seconds, respectively, after transmitting through 7.7 km of HCF. To the best of knowledge, this is the best ever performance for km‐lengths of fiber‐based OFC distribution. Besides, other HCF advantages over SMF in this application are discussed. Specifically, HCFs offer over an order of magnitude lower thermal sensitivity of propagation delay, several orders of magnitude lower optical nonlinearity, and almost ten times lower chromatic dispersion.

Low-Latency and High-Speed Hollow-Core Fiber Optical Interconnection at 2-Micron Waveband

Optical Amplification-Free High Baudrate Links for Intra-Data Center Communications

Optical Amplification-Free Deep Reservoir Computing-Assisted High-Baudrate Short-Reach Communication

High-fidelity, Low-Latency Polarization Quantum State Transmissions over a Hollow-Core Conjoined-Tube Fiber at Around 800 Nm

Low-crosstalk Laser-Direct-writing FI/FO Device for 8×100-Gbps Optical Interconnection

First Demonstration of Field-Deployable Low Latency Hollow-core Cable Capable of Supporting >1000km, 400Gb/s WDM Transmission

High-fidelity sub-petabit-per-second self-homodyne fronthaul using broadband electro-optic combs

Record Ultra-high Capacity 50.7-Tbit/s WDM Coherent Transmission in Hollow-Core Fiber

High-Throughput and Long-Distance Transmission With >120 nm S-, C- and L-Band Signal in a 125μm 4-Core Fiber

Stable Optical Frequency Comb Distribution Enabled by Hollow‐Core Fibers

Demonstration of Beyond Terabit/s/lambda Nonlinearity-free Transmission over the Hollow-core Fibre

Ultralow-Loss Fusion Splicing Between Negative Curvature Hollow-Core Fibers And Conventional Smfs With A Reverse-Tapering Method

Towards high-capacity fibre-optic communications at the speed of light in vacuum

Hollow-core Conjoined-Tube Fiber for Penalty-Free Data Transmission under Offset Launch Conditions.

Self-homodyne Coherent Detection Transmission through a (1+8) Multicore Fiber with One Polarization-maintaining Core

Net 8×250 Gbit/s/λ PAM6/8 Optical Interconnect Over High-Density Eight-Core Fiber and Low-Crosstalk Laser Direct Writing FI/FO Devices

Low-loss microwave photonics links using hollow core fibres

C-band 312gbps PAM8 Transmission over 30km SMF Using Integrated Optical Dispersion Compensator

Dual Carrier Modulation 300 GHz DSM Terahertz Wave Signals Transmitted via Hollow-Core Fiber

Dual Carrier Modulation 300ghz DSM Terahertz Wave Signals Transmitted Via Hollow-core Fiber

First Penalty-free Real-time Co-frequency Co-time Full-duplex Optical Fiber Transmission with 202.1tb/s Net Capacity Enabled by Hollow-core 5-Element NANF