Abstract:Aluminum-doped zinc oxide (AZO) is a popular, low-cost, nontoxic material that finds application as a transparent conducting electrode in photonic, sensing, and photovoltaic devices. We report the AZO thin films with a high figure of merit on large-area glass substrates by direct current magnetron sputtering without any intentional substrate heating. Furthermore, a simple thermal post-treatment to improve the transmittance of AZO thin film in the infrared region for its application in low-band-gap devices is presented. High optoelectronic properties are obtained by optimizing oxygen content during the sputtering process. The structural, morphological, optoelectrical, and photoluminescence characterization of cold sputtered AZO films is investigated for its latent applications. AZO thin films with an electrical sheet resistance of 8.8 Ω/□ and a visible light transmittance of 78.5% with thickness uniformity above 95% are achieved on 300 mm × 300 mm glass substrate. The AZO film with optimized process conditions is employed as a transparent electrode to fabricate a copper-indium-gallium-selenide-based thin film solar cell, demonstrating 11.8% power conversion efficiency. The AZO film with optimized sputter conditions was post-treated in ambient conditions with an Al blanket to suppress the resistivity by proper organization of the defects due to Al consumption and point defects, resulting in improved transparency (85%) in the infrared region with a sheet resistance of 40 Ω/□. This has great potential for developing scalable and low-cost AZO thin films for transparent electrodes in a wide range of the spectrum.

Growth of ZnO:Al films by RF sputtering at room temperature for solar cell applications

The fabrication and application of ZnO:Al thin films in low-frequency inductively coupled plasma fabricated silicon solar cell

High-rate, Room Temperature Plasma-Enhanced Deposition of Aluminum-Doped Zinc Oxide Nanofilms for Solar Cell Applications

Study of ZnO:Al Films for Silicon Thin Film Solar Cells

Highly Surface-Textured ZnO:Al Films Fabricated by Controlling the Nucleation and Growth Separately for Solar Cell Applications

Influence of working pressure on ZnO:Al films from tube targets for silicon thin film solar cells

Natively Textured Surface Aluminum-Doped Zinc Oxide Transparent Conductive Layers for Thin Film Solar Cells Via Pulsed Direct-Current Reactive Magnetron Sputtering

Effect of ZnO buffer layer on AZO film properties and photovoltaic applications

Characterization of Surface Morphology and Light Scattering of Transparent Conducting ZnO:Al Films as Front Electrode for Silicon Thin Film Solar Cells

Synthesis of ZnO:Al Transparent Conductive Thin Films Using Sol-gel Method

Light Scattering by Textured Al-Doped Zinc Oxide Film for Thin Film Silicon Solar Cells Coated on Glass Substrates

Self-Flattened ZnO:Al Transparent Conductive Thin Films Derived by Sol–Gel Process

Aluminium doped zinc oxide sputtered from rotatable dual magnetrons for thin film silicon solar cells

Tailoring the Morphology, Optical and Electrical Properties of DC-sputtered ZnO:Al Films by Post Thermal and Plasma Treatments

Highly Surface-Textured and Conducting Zno:Al Films Fabricated from Oxygen-Deficient Target for Cu(In, Ga)Se-2 Solar Cell Application

ZnO:Al Films Prepared by RF Magnetron Sputtering at Room Temperature

RF magnetron sputtering processed transparent conductive aluminum doped ZnO thin films with excellent optical and electrical properties

Formation of Cl-Doped ZnO Thin Films by a Cathodic Electrodeposition for Use As a Window Layer in CIGS Solar Cells

The properties of surface textured ZnO:Al films grown in hydrogen atmosphere

Reactive Sputtering of ZnO:Al Thin Films from Rotatable Dual Metallic Targets

Room Temperature Sputtered Aluminum-Doped ZnO Thin Film Transparent Electrode for Application in Solar Cells and for Low-Band-Gap Optoelectronic Devices