Abstract:Aluminum-doped zinc oxide (AZO) is a popular, low-cost, nontoxic material that finds application as a transparent conducting electrode in photonic, sensing, and photovoltaic devices. We report the AZO thin films with a high figure of merit on large-area glass substrates by direct current magnetron sputtering without any intentional substrate heating. Furthermore, a simple thermal post-treatment to improve the transmittance of AZO thin film in the infrared region for its application in low-band-gap devices is presented. High optoelectronic properties are obtained by optimizing oxygen content during the sputtering process. The structural, morphological, optoelectrical, and photoluminescence characterization of cold sputtered AZO films is investigated for its latent applications. AZO thin films with an electrical sheet resistance of 8.8 Ω/□ and a visible light transmittance of 78.5% with thickness uniformity above 95% are achieved on 300 mm × 300 mm glass substrate. The AZO film with optimized process conditions is employed as a transparent electrode to fabricate a copper-indium-gallium-selenide-based thin film solar cell, demonstrating 11.8% power conversion efficiency. The AZO film with optimized sputter conditions was post-treated in ambient conditions with an Al blanket to suppress the resistivity by proper organization of the defects due to Al consumption and point defects, resulting in improved transparency (85%) in the infrared region with a sheet resistance of 40 Ω/□. This has great potential for developing scalable and low-cost AZO thin films for transparent electrodes in a wide range of the spectrum.

Self-Flattened ZnO:Al Transparent Conductive Thin Films Derived by Sol–Gel Process

Surface Topography and Optical Properties of Al-doped ZnO Thin Films by Sol-gel Process

Sol-gel Derived Zn1-xMgxO:Al Transparent Conductive Thin Film and Its Application to Thin Film Solar Cells

Highly Surface-Textured ZnO:Al Films Fabricated by Controlling the Nucleation and Growth Separately for Solar Cell Applications

Synthesis of ZnO:Al Transparent Conductive Thin Films Using Sol-gel Method

The properties of surface textured ZnO:Al films grown in hydrogen atmosphere

Characterization of Surface Morphology and Light Scattering of Transparent Conducting ZnO:Al Films as Front Electrode for Silicon Thin Film Solar Cells

Growth of ZnO:Al films by RF sputtering at room temperature for solar cell applications

Effect of Film Thickness on Properties of Al-Doped Zno Film As Transparent Conducting Electrodes in Oleds

The fabrication and application of ZnO:Al thin films in low-frequency inductively coupled plasma fabricated silicon solar cell

Room Temperature Sputtered Aluminum-Doped ZnO Thin Film Transparent Electrode for Application in Solar Cells and for Low-Band-Gap Optoelectronic Devices

Development of Textured ZnO∶Al Transparent Conductive Oxide Thin Films

Investigation on Transparent, Conductive ZnO:Al Films Deposited by Atomic Layer Deposition Process

Fabrication of Flexible Al-doped ZnO Films Via Sol–gel Method

Aluminum doped ZnO transparent conducting thin films prepared by sol-gel dip coating technique for solar cells and optoelectronic applications

Optical and structural properties of Al-doped ZnO thin films by sol gel process

Preparation of Aluminum Doped Zinc Oxide Films with Low Resistivity and Outstanding Transparency by a Sol–gel Method for Potential Applications in Perovskite Solar Cell

Single Crystalline Transparent Conducting F, Al, and Ga Co-Doped ZnO Thin Films with High Photoelectrical Performance

Aluminum-Doped Zinc Oxide Transparent Electrode Prepared by Atomic Layer Deposition for Organic Light Emitting Devices

Characteristics of Al-doped C-Axis Orientation ZnO Thin Films Prepared by the Sol–gel Method

Enhanced Sol–Gel Route to Obtain a Highly Transparent and Conductive Aluminum-Doped Zinc Oxide Thin Film