Abstract:Aluminum-doped zinc oxide (AZO) is a popular, low-cost, nontoxic material that finds application as a transparent conducting electrode in photonic, sensing, and photovoltaic devices. We report the AZO thin films with a high figure of merit on large-area glass substrates by direct current magnetron sputtering without any intentional substrate heating. Furthermore, a simple thermal post-treatment to improve the transmittance of AZO thin film in the infrared region for its application in low-band-gap devices is presented. High optoelectronic properties are obtained by optimizing oxygen content during the sputtering process. The structural, morphological, optoelectrical, and photoluminescence characterization of cold sputtered AZO films is investigated for its latent applications. AZO thin films with an electrical sheet resistance of 8.8 Ω/□ and a visible light transmittance of 78.5% with thickness uniformity above 95% are achieved on 300 mm × 300 mm glass substrate. The AZO film with optimized process conditions is employed as a transparent electrode to fabricate a copper-indium-gallium-selenide-based thin film solar cell, demonstrating 11.8% power conversion efficiency. The AZO film with optimized sputter conditions was post-treated in ambient conditions with an Al blanket to suppress the resistivity by proper organization of the defects due to Al consumption and point defects, resulting in improved transparency (85%) in the infrared region with a sheet resistance of 40 Ω/□. This has great potential for developing scalable and low-cost AZO thin films for transparent electrodes in a wide range of the spectrum.

Preparation of Aluminum Doped Zinc Oxide Films with Low Resistivity and Outstanding Transparency by a Sol–gel Method for Potential Applications in Perovskite Solar Cell

Surface Topography and Optical Properties of Al-doped ZnO Thin Films by Sol-gel Process

Room Temperature Sputtered Aluminum-Doped ZnO Thin Film Transparent Electrode for Application in Solar Cells and for Low-Band-Gap Optoelectronic Devices

Aluminum-Doped Zinc Oxide As Highly Stable Electron Collection Layer for Perovskite Solar Cells

Highly Surface-Textured ZnO:Al Films Fabricated by Controlling the Nucleation and Growth Separately for Solar Cell Applications

Development of aluminum-doped ZnO films for a-Si:H/μc-Si:H solar cell applications

Optical and structural properties of Al-doped ZnO thin films by sol gel process

Atomic Layer Engineering of Aluminum‐Doped Zinc Oxide Films for Efficient and Stable Perovskite Solar Cells

Effect of Film Thickness on Properties of Al-Doped Zno Film As Transparent Conducting Electrodes in Oleds

Study on Aluminum Concentration on Optical and Electrical Properties of AZO Thin Films Fabricated by Ultrasonic Spray Pyrolysis

Optimization of the Process for Preparing Al-doped ZnO Thin Films by Sol-Gel Method

Aluminum and Molybdenum Co-Doped Zinc Oxide Films as Dual-Functional Carrier-Selective Contact for Silicon Solar Cells

Enhanced Sol–Gel Route to Obtain a Highly Transparent and Conductive Aluminum-Doped Zinc Oxide Thin Film

Fluorine, chlorine, and gallium co-doped zinc oxide transparent conductive films fabricated using the sol-gel spin method

Effect of heat treatment on microstructure and transparent conducting properties of sol-gel ZnO/Al thin films

Wet-chemical surface texturing of AZO substrate for improved perovskite solar cells

Effect of aluminum doping on zinc oxide thin films grown by pulsed laser deposition for organic light-emitting devices

Front Transparent Passivation of CIGS-Based Solar Cells via AZO

Tailoring of Optical and Electrical Properties of Transparent and Conductive Al-doped ZnO Films by Adjustment of Al Concentration

Transparent Conductive Al-Doped Zno Thin Films Grown at Room Temperature

Systematic optimization of sol–gel processed Al-doped ZnO for cost-effective transparent conductive oxide