Abstract:A novel reaction hot pressing process was developed for the fabrication of in situ (Mo,Ti)(C,N)-based cermets without a conventional core/rim structure. Moreover, the reaction mechanism of the Co–Mo–Ti–TiN–C system was investigated. The results indicate that the allotropic transformation of hexagonal ε Co→cubic α Co occurred first. Then, solid-state reactions of powder mixtures were conducted, which contributed to the synthesis of Mo 2 C, CoTi 2 , and TiC. Continuous heating induced a peritectic reaction of CoTi 2 →CoTi + Co–Ti liquid. The presence of a Co–Ti liquid facilitated the dissolution of C, and the production of a Co–Ti–C melt. In the liquid, TiC was prepared. Then, in situ TiC was combined with ex situ TiN to synthesise Ti(C,N). As the temperature increased, Mo/Mo 2 C diffused into whole Ti(C,N) particles, resulting in the formation of micro coreless (Mo,Ti)(C,N) grains. Subsequently, residual Mo 2 C and part of (Mo,Ti)(C,N) dissolved into a Co–Ti–C liquid, resulting in the formation of a Co–Mo–Ti–N–C melt. Once the liquid became saturated, ultrafine (Mo,Ti)(C,N) particulates with a weak or non-existent core/rim structure were precipitated. (Mo,Ti)(C,N)-based cermets can be prepared at 1523 K. An increased sintering temperature enhanced the relative density and homogeneity of the cermets, eliminated the by-products Mo 2 C and Co 3 Mo, and promoted the formation of more ultrafine (Mo,Ti)(C,N) particles. These effects increased the hardness and fracture toughness of the prepared cermets. The results of this work provide valuable guidance for the development of in situ coreless Ti(C,N)-based cermets.

Production of morph-genetic TiC/C ceramic

Columbite-rich Multiphase TiO2 Nanoceramic with Superior Mechanical and Dielectric Properties

Investigation of TiC formation during ball-milling of elemental titanium and carbon

Mechanosynthesis Mechanism of Tic Powders

Porous Titanium Carbide Ceramics Fabricated by Coat-Mix Process

Microstructure, Mechanical Property and Thermal Conductivity of Porous TiCO Ceramic Fabricated by In Situ Carbothermal Reduction of Phenolic Resin and Titania

Morphology of and surface modification by TiO2 deposits on a porous ceramic substrate

Preparation and Sinterability of Submicron Titanium Carbide Powders Synthesized with Phenolic Resin As Carbon Source by Carbothermal Reduction

Effect of nano-TiC addition on sinterability and mechanical properties of TiC high temperature ceramics

Effects of process parameters on morphologies of titanium carbide powder by thermal plasma treatment

TIC/Al cermet (ceramics+metal) structuring and composition forming with spontaneous infiltration of aluminum melt into a porous hot titanium carbide frame obtained by the SHS (Self-propagating high temperature synthesis) method

Transient plastic phase processing of titanium-boron-carbon composites

Direct Synthesis of Controllable Microstructures of Thermally Stable and Ordered Mesoporous Crystalline Titanium Oxides and Carbide/Carbon Composites

Microstructural evolution and phase transition mechanism of Ti(C,N)-based cermets during vacuum sintering process

Influence of Titanium Dioxide on the Microstructure and Properties of Porous Cordierite Ceramics

Forming of the Ti6Al4V-60 %TiB2 metal-ceramic microcomponent under coupled multi-physical fields for improved microstructures and mechanical performances

The production of in situ (Mo,Ti)(C,N)-based cermets without a core/rim structure by reaction hot pressing: Formation mechanism and mechanical properties

Impact of Sintering Temperature Variation on Porous Structure of Mo2TiAlC2 Ceramics

Microstructures and mechanical properties of in-situ SiC-TiB2 ceramic composites fabricated by reactive melt infiltration

Toughening mechanism of B4C/TiB2 ceramic materials by in situ reaction via spark plasma sintering

Effects of pore microstructures on thermal and mechanical properties of porous TiC fabricated by hot press sintering