Abstract:The relationship between von Mises equivalent stress <math>σ¯</math> and equivalent plastic strain <math>ε¯</math> (PEEQ), termed as von Mises stress-strain, plays an important role in numerical simulations for ductile fracture of structural metallic materials with large plastic strain. The standard uniaxial tensile test on cylindrical specimens is the most straightforward method to derive the (<math>σ¯−ε¯</math>) data. However, the distribution of the stress and strain along the necking section of the tensile specimen is no longer uniform in the post-necking process, which induces difficulty in acquiring the (<math>σ¯−ε¯</math>) data. The existing correction methods to identify von Mises stress-strain in the post-necking regime need instantaneous geometry of the notched region and ignore influence of the initial geometry of the specimen, which induces these methods are inconvenient for application and inapplicable for circumferentially notched tensile specimens to determine (<math>σ¯−ε¯</math>) of each individual material zone in a hybrid coupon (e.g. weldment). In the present study, influences of initial geometry of the specimen and plastic hardening property of material on necking process are investigated firstly. It is found that the shrinking behavior of the minimum cross-section of the specimen is determined by the geometric parameter of specimen and plastic hardening exponent of materials. Based on an extensive parametric study a modified power law function to characterize the von Mises stress-strain curve from tensile tests on circumferentially notched specimens without measuring instantaneous geometry of cross-section is proposed.

Validation and application of a screw method for strain measurement in bulk metal forming

A Friction Evaluation Method Based on Barrel Compression Test

Experimental Study of High-Frequency Vibration Assisted Micro/Meso-Scale Forming of Metallic Materials

Experimental Methodology for Obtaining the Flow Curve of Sheet Materials in a Wide Range of Strains

Validation of Finite-Element Plasticity Models Using Full-Field Surface Strain Measurements

Implementation and Verification of a Dual-Probe Measurement System for Geometric Form Evaluation of a Ring-Type Cylinder

Novel method for measuring surface residual stress using flat-ended cylindrical indentation

Novel Ring Compression Test Method to Determine the Stress-Strain Relations and Mechanical Properties of Metallic Materials

Experimental Verification of a Benchmark Forming Simulation

Experimental Determination of a Strain State in a Bulk Forming of a Low Carbon Steel

A novel method to extract the equi-biaxial residual stress and mechanical properties of metal materials by continuous spherical indentation test

Spherical indentation method for estimating equibiaxial residual stress and elastic–plastic properties of metals simultaneously

A Novel Method for Friction Coefficient Calculation in Metal Sheet Forming of Axis-Symmetric Deep Drawing Parts

Simplified method to identify full von Mises stress-strain curve of structural metals

Proposal and application of a new yield criterion for metal plastic deformation

An Energy-Based Method to Extract Plastic Properties of Metal Materials from Conical Indentation Tests

Determining plastic properties of a material with residual stress by using conical indentation

Strain measurement by contour analysis

A VFM-based identification method for the dynamic anisotropic plasticity of sheet metals

On the flat punch hole expansion test of sheet metals: Mechanics of deformation and evaluation of anisotropic plasticity models

An extended mesoscaled M-K model for predicting discrete ultimate strains and evaluating the effect of normal stress on forming limits