An investigation on the friction in a micro sheet metal roll forming processes considering adhesion and ploughing
Zhutian Xu,Jihui Huang,Mengyun Mao,Linfa Peng,Xinmin Lai
DOI: https://doi.org/10.1016/j.jmatprotec.2020.116790
IF: 6.3
2020-11-01
Journal of Materials Processing Technology
Abstract:<p>Due to the lack of thorough understanding of the frictional behavior in microforming processes, there is a significant challenge for the process design and optimization towards smart manufacture of micro products. In the present study, the challenging issue of friction in microforming was revealed from an instance of a micro sheet metal roll forming process, which has been found to be an efficient method to fabricate micro channel features with a high aspect ratio. Based on the experimental observations and analysis, the forming process and final product geometry are revealed to be sensitive to the friction behavior. The contact pressure between tool and sample was highly uneven and variable during the process, indicating a proper description of friction behavior is vital for the accurate process prediction and optimization. In the experimental study, significant ploughing scratches with the maximum depth of 5-7 μm were observed on the formed samples, especially with the increase of rolling depth. The ploughing effect, which could be neglected in macro scale forming processes, was revealed to affect the friction force during the micro sheet metal roll forming process, and further influence the thickness distribution. To deal with that, a friction model considering both adhesion and ploughing effects in friction was developed. By incorporating the friction model into FE simulations, satisfying agreements in forming profile, ploughing depth and thickness distribution between calculated and experimental results were observed.</p>
materials science, multidisciplinary,engineering, manufacturing, industrial