Abstract:In this paper, a series of experiments including room-temperature low-cycle fatigue tests, instrumented indentation measurements, optical microscopy examinations, etc. were carried out to study the local mechanical properties and microstructures in particular zones of 304L SS welded joints in both the as-welded and cyclic straining conditions. An analytical algorithm proposed by Dao et al. [12] was utilized to estimate the basic mechanical properties (E, σy and n) from the indentation load-depth data. It is shown that in the as-welded condition, the weld metal has a higher strength and strain hardening capacity but a lower stiffness than does the base metal, while the material within HAZ exhibits a significant gradient of the mechanical properties. A strain amplitude-dependent variation in the local mechanical properties in particular joint regions was also obtained. Optical microscopy examinations showed that the microstructure in particular zones of 304L SS welded joints was not only decided by the metallurgical condition resulting from the welding process, but also determined by the strain amplitude applied during cyclic straining. In this study, an empirical criterion for judging the fracture locations of a weldment based on the yield stress mismatch ratio was also introduced to assess the integrity of the present 304L SS welded joints subjected to low-cycle fatigue loadings. The research work performed in this paper would further expand the applications of instrumented indentation technique in fatigue strength analysis of welded components.

A novel method to extract the equi-biaxial residual stress and mechanical properties of metal materials by continuous spherical indentation test

Spherical indentation method for estimating equibiaxial residual stress and elastic–plastic properties of metals simultaneously

A novel model to obtain equi-biaxial residual stress of metallic materials via instrumented spherical indentation

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Depth-Sensing Indentation-Based Studies of Surface Mechanical Behavior and Fatigue Damage Evolution of an Austenitic Stainless Steel Subjected to Cyclic Straining

A further study on representative models for calculating the residual stress based on the instrumented indentation technique

Novel method for measuring surface residual stress using flat-ended cylindrical indentation

An Energy-Based Method to Extract Plastic Properties of Metal Materials from Conical Indentation Tests

Use of instrumented indentation testing to study local mechanical properties of 304L SS welded joints subjected to low-cycle fatigue loadings

Assessing the Residual Stresses in Dissimilar Welded Joint: Depth-Sensing Indentation Testing and Numerical Simulation

Determining plastic properties of a material with residual stress by using conical indentation

Spherical Indentation into Elastoplastic Materials: Indentation-response Based Definitions of the Representative Strain

Identification of plastic properties through spherical indentation

Calculating the Mechanical Properties of DX56 Steel by the Spherical Indentation Method

A dual indentation method for evaluating intrinsic material properties of metals under residual stress

Nondestructive testing method of residual stresses in metallic materials based on Knoop indentation technique

A unified sharp indentation method for obtaining stress-strain relations, strength and Vickers hardness of ductile metallic materials

Extracting the isotropic uniaxial stress-strain relationship of hyperelastic soft materials based on new nonlinear indentation strain and stress measure

An Inverse Approach to Determine the Mechanical Properties of Elastoplastic Materials Using Indentation Tests

Semi-analytical model for predicting mechanical properties of metals using flat truncated cone indenter and its application

Semi-analytical model for flat indentation of metal materials and its applications