Abstract:Conductive metallic LaNiO3 (LNO) films were prepared by metallo-organic decomposition. 2-Ethylhexanoates of lanthanum and nickel were synthesized as the metallo-organic precursors. The films were obtained by spin-on pyrolysis in air on various substrates and then annealing at various temperature in oxygen or air. Thermogravimetric analysis, inductively coupled plasma analysis, X-ray diffraction, transmission electron microscopy, Rutherford backscattering spectrometry and electrical measurements were used to determine the synthesis process and the characterization of the films. The effect of different thermal treatments, annealing temperature and substrates on crystallinity, orientation and conductive behavior of LNO films was studied. The results indicated the pyrolysis process is the critical step to obtain good metallic LNO films at lower grown temperature. Epitaxial metallic LNO films could be fabricated on SrTiO3 (STO). The trend of resistance as a function of annealing temperature of LNO films on STO, fused quartz and Si substrates showed LNO films on STO have lower crystalline temperature and higher transition temperature from conductor to insulator than on fused quartz and Si. © 1997 Elsevier Science S.A. All rights reserved.

ChemInform Abstract: Preparation of Crystalline LiNbxTa1‐xO3 (0 ≤ X ≤ 1) Films from Metal Alkoxide Solutions.

Preparation of Crystalline LiNbxTa1−xO3(0≤x≤1) Films from Metal Alkoxide Solutions

Synthesis of Nanocrystalline Ferrites Zn0.4ni0.6cr0.5laxfe1.5-Xo4 and Its Magnetic Properties

Processing of Crystalline Li(Nb, Ta)O3 Films with Preferred Orientation Through Metal Alkoxides

Preparation of C-Axis Oriented Linb1-Xtaxo3 Films on Si(111) Substrates by A Modified Sol-Gel Process

Processing of Crystalline Linbo3 Films with Preferred Orientation by Organometallic Route

Preparation of LiTaO<sub>3</sub> Nano-Crystalline Films by Sol-Gel Process

Preparation of LiTaO3 nano-crystalline films by sol-gel process

C-axis oriented sol–gel derived LiNb1−xTaxO3 thin films on Si(111) substrates

Preparation And Properties Of Nb2o5-Fe2o3 Sol-Gel Optical Films

Crystallization behavior of LiNO3-doped SiO2-TiO2 films prepared through sol-gel method

Crystallization Behavior of Li+-Doped Sio2-Tio2 Films Prepared by Sol-Gel Dip Coating

Synthesis of LiNbO3by Hydrolysis of Metal Alkoxides

Conductive Metallic Lanio3 Films from Metallo-Organic Precursors

Preparation and Characterization of LiTaO 3 Films Derived by an Improved Sol-Gel Process

Synthesis and Electrical Properties of Garnet-type Solid Oxide Electrolyte Thin Films from Solution Route

Preparation of 〈100〉-Oriented Ba1-xSr xO3 films on Ni substrates by sol-gel method

ChemInform Abstract: LiNbO3‐Type Oxide (tl1‐xscx)sco3: High‐Pressure Synthesis, Crystal Structure, and Electronic Properties.

Structure, optical, and electrical properties of (Mn1.56Co0.96Ni0.48O4)1−x(LaMn0.6Al0.4O3)x composite thin films

Preparation of Nanocrystalline LiMn1.90Cr0.05Ni0.05O4

Crystallization behavior of LiNO3-doped TiO2 films prepared by sol-gel process