Abstract:Pulse tube refrigerators are widely used in certain special fields, such as aerospace, due to their unique advantages. Compared to a conventional phase shifter, the active displacer helps to achieve a higher cooling efficiency for pulse tube refrigerators. At present, the displacer is mainly studied by one-dimensional simulation, and the optimization method is not perfect due to its poor accuracy, which is not conducive to obtaining a better performance. Based on the current status of displacer research, phase-shift mechanisms of inertance tube pulse tube refrigerators and active displacer pulse tube refrigerators were firstly studied comparatively by multidimensional simulation, and then we determined the crucial effect properties that lead to a better cooling performance for the active displacer pulse tube refrigerator at different cooling temperatures. Finally, an efficient optimization method combining the Kriging model and genetic algorithm is proposed to further improve the cooling performance of the active displacer pulse tube refrigerator. The results show that the active displacer substantially improves the cooling performance compared to the inertance tube mainly by increasing the PV power and enthalpy flow in the pulse tube. The Kriging agent models of active displacer pulse tube refrigerator achieve 98.2%, 98.31%, 97.86%, and 97.32% prediction accuracy for no-load temperature, cooling capacity, coefficient of performance, and total input PV power, respectively. After optimization, the no-load temperature is minimally optimized for a 23.68% reduction compared to the initial one with a relatively high efficiency, and the founded optimization methods can also be weighted for multiple objectives, according to actual needs.

Experimental study on the performance of the labyrinth sealing displacer for 10K G-M refrigerator

Experimental study on the sealing clearance between the labyrinth sealing displacer and cylinder in the 10K G-M refrigerator

Experimental investigations and improvements for the 10 K G-M refrigerator

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Laminated Dlisplacer in Plastic Cryocooler with Gap Regenerator

Effect of the Performance of the G-M Cryocooler with Labyrinth Sealing Displacer

Development And Analysis Of A 4.2k G-M Refrigerator

Experimental investigation on DC flow suppression and refrigeration characteristics of a high-performance single-stage GM-type

Dynamic Simulation of One-Stage G-M Refrigerator and Comparison with Experiment

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

A review of refrigerator gasket: Development trend, heat and mass transfer characteristics, structure and material optimization

Study on Phase-Shift Mechanism and Kriging-Based Global Optimization of the Active Displacer Pulse Tube Refrigerators

Experimental study on the low temperature regenerator packed with rectification meshes

Experimental investigation on pulse tube refrigerator with binary mixtures

Performance Characteristics of a Magnetic Ericsson Refrigeration Cycle Using La(Fe0.88Si0.12)13H1 or Gd As the Working Substance

Numerical simulation of a low temperature hybrid refrigerator combining GM gas expansion refrigeration with magnetic refrigeration

Experimental Research on a 4 K Hybrid Refrigerator Combining GM Gas Refrigeration Effect with Magnetic Refrigeration Effect

On the numerical design of a new type of 4 K GM/PT hybrid refrigerators

Experimental study on a compact two-stage G-M refrigerator used in cryopump

Performance Study and Optimization of a New Type of 4 K GM / PT Hybrid

Performance Improvement of a 4 K GM/magnetic Hybrid Refrigerator with a New Magnetic Regenerator