Abstract:The energy efficiency of refrigerators not only depends on the efficiency of the various components used in the cycle but also on their thermodynamics cycle efficiency as well the thermal efficiency of the cabinet housing the components. Efficiency improvements to the thermodynamics cycle and refrigerator components have been the subject of various papers published in the open literature. Not many researchers have looked at reducing the heat leakage into the refrigerator cabinet with the explicit objective of reducing the power consumption of the unit and hence improving its thermal efficiency. This paper is based on an experimental study of this topic, and includes information on the experimental rig used and the results obtained. This research was performed in two stages: The first stage was focused on improving the energy efficiency by changing wall insulation while the second stage was to study the heat transfer through the doors’ gaskets. For the first part, a domestic refrigerator was instrumented with many thermocouples and heat flux meters to measure the inside and outside air temperatures and the heat transfer through the wall of the unit, respectively. These measurements were taken under different environmental conditions as well as different insulation thickness in the walls of the cabinet. For the second part, using a specially designed and manufactured experimental rig, various door gaskets were placed between a warm and a cold chamber and heat transfer through the gasket was measured. The results showed that by adding 30 mm polystyrene insulation to the walls of the refrigerator, the heat transfer through the walls reduced by around 35%. The power consumption data agreed very well with the measured heat flux through the walls. The percentage heat transfer through the doors’ gaskets was confirmed to be about 13% of the total heat transferred into the unit.

A review of refrigerator gasket: Development trend, heat and mass transfer characteristics, structure and material optimization

Effect of structural improvement of gaskets on the heat leakage load and energy consumption of the refrigerator

Study of breathing behavior and its heat load for a refrigerator through the gasket

Research on test method of heat transfer coefficient for refrigerator gasket

Numerical and Experimental Study on Heat Transfer Characteristic and Thermal Load of the Freezer Gasket in Frost-Free Refrigerators

Energy Efficient Refrigerators: The Effect of Door Gasket and Wall Insulation on Heat Transfer

Moist Air Permeability Characteristics of Flexible Contact Gaskets Used in Refrigerators

Development And Analysis Of A 4.2k G-M Refrigerator

Effect of elastic deformation on the heat transfer characteristic of refrigerator gasket based on static analysis of structural assemblies

An Experimental Investigation on A Novel Ejector Enhanced Refrigeration Cycle Applied in the Domestic Refrigerator-Freezer

Leakage, Diffusion and Distribution Characteristics of Refrigerant in a Limited Space:A Comprehensive Review

Steady Heat Transfer Analysis of the Refrigerator Seal Considering Rigid and Flexible Contact

Experimental study on the performance of the labyrinth sealing displacer for 10K G-M refrigerator

Preliminary evaluation of the energy-saving behavior of a novel household refrigerator

The mass and heat transfer process through the door seal of refrigeration

Experimental study on the sealing clearance between the labyrinth sealing displacer and cylinder in the 10K G-M refrigerator

Experimental investigations and improvements for the 10 K G-M refrigerator

A Critical Review of Real Gas Effects on the Regenerative Refrigerators

Energy-Saving Design and Energy Consumption Analysis of a New Vacuum Refrigerator

Frosting and Defrosting Characteristics of Household Refrigerators and Freezers: Recent Progress and Perspectives

Numerical analysis of pressure variation and gas load effects in the refrigeration system for household refrigerators