Abstract:The numerical model of a staggered labyrinth seal working with supercritical carbon dioxide (S–CO2) is established. The dynamic and static characteristics of the staggered labyrinth seal for different axial shifting distances of the rotor, various cavity geometries (heights/widths of the rotor convex plate, heights of the seal cavity), and seal clearances were investigated and compared with the conventional see-through labyrinth seal. The results show that the effective damping coefficient (Ceff) with positive axial shifting distance is higher than that with negative axial shifting distance. When the rotor with convex plate operates without axial shifting, the cross-coupled complex dynamic stiffness (hR) of the staggered labyrinth seal shows little effect on the Ceff, and the average direct damping (Cavg) has a dominant influence on the Ceff. As the whirling frequency (Ω) is lower than 60 Hz, the Ceff decreases with increasing height of the rotor convex plate. For Ω < 140 Hz, the damping coefficient generally increases with the decreasing height of the seal cavity. For Ω < 160 Hz, the Ceff of the see-through labyrinth seal is about 107%–649% of the staggered labyrinth seal. Otherwise, the Ceff of the staggered labyrinth seal is about 105%–113% of the see-through labyrinth seal. The Ceff of the seal with the rotor convex plate width of 5.13 mm is relatively high, which is conducive to the stability of the system. The Ceff increases with the decreasing seal clearance. The Ceff of the seal with 0.4 mm clearance is about 116%–148% the seal with 0.6 mm. The leakage flow rate of the staggered labyrinth seal of the see-through labyrinth seal is increased by about 45.5%. The leakage flow rate of the staggered labyrinth seal decreases with the increasing convex plate height, the seal cavity height, and the decreasing seal clearance.

Experimental study on the sealing clearance between the labyrinth sealing displacer and cylinder in the 10K G-M refrigerator

Experimental study on the performance of cryogenic seal structure with indium

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Laminated Dlisplacer in Plastic Cryocooler with Gap Regenerator

Experimental Results of the Internal Process of A Double Inlet Pulse Tube Refrigerator

Development And Analysis Of A 4.2k G-M Refrigerator

Research on Compatibility Between Ethyl Fluoride With/without Lubricant Oils, and Plastics and Elastomers

Experimental investigation on DC flow suppression and refrigeration characteristics of a high-performance single-stage GM-type

Theoretical investigation on an ejector–expansion refrigeration cycle using zeotropic mixture R290/R600a for applications in domestic refrigerator/freezers

Experimental Investigations on A R134a Ejector Applied in A Refrigeration System

An Experimental Investigation on A Novel Ejector Enhanced Refrigeration Cycle Applied in the Domestic Refrigerator-Freezer

Preliminary study on the performance of the diffusion absorption refrigerator operating with the mixed refrigerant

A review of refrigerator gasket: Development trend, heat and mass transfer characteristics, structure and material optimization

Study of breathing behavior and its heat load for a refrigerator through the gasket

Experimental investigation on pulse tube refrigerator with binary mixtures

Study on Phase-Shift Mechanism and Kriging-Based Global Optimization of the Active Displacer Pulse Tube Refrigerators

Numerical Study of Leakage and Rotordynamic Performance of Staggered Labyrinth Seals Working with Supercritical Carbon Dioxide

Numerical simulation of a low temperature hybrid refrigerator combining GM gas expansion refrigeration with magnetic refrigeration

Theoretical and experimental research towards labyrinth sealing mechanism of liquid nitrogen in the cryogenic spindle

Experimental study of the magnetic fluid reciprocating seal in vacuum environment

Performance of a linear refrigeration compressor with small clearance volume