Abstract:The treatment effect of the combination process (pre-ozonation→high-density clarifier→sand filter→post ozonation→biological activated carbon(BAC) filter) was much better than that of the conventional process in treating the Huangpu River water, which is especially suit to high organic material and NH4 +-N in water. The removal efficiencies of CODMn and NH4 +-N by the post ozonation-BAC process were up to 30.4% and 18.9% respectively. And as the pre-ozonation process played a better role than pre-chlorination process in aid-coagulation, the removal efficiencies of CODMn and NH4 +-N were up to 29.6% and 81% respectively in traditional part of combination process. However, the removal efficiencies of CODMn and NH4 +-N were only 22.3% and 61.5% in the conventional process. In addition, the concentrations of algae toxins, trihalomethanes, bromate, molecular weight distribution and the related parameters of the BAC effluent were also investigated. The results show that the organic material with low molecular weight can be more easily removed by the post ozonationBAC processes (removal efficiency of organic material with molecular weight less than 1 kD is more than 70%). Tihalomethanes formation potential is 41% less than that of the conventional process. Besides, the microcystin and bromate concentrations are lower than drinking water standards in China. Moreover, the free chlorine disinfection can be used because the NH4 +-N can be mostly removed by the combination process, which can avoid the generation of nitrosamine as well as the odor and test problem by chloramine disinfection. However, the combination process also has some disadvantages such as the growth of algae on the purification structures during high-temperature season as the reaction time of ozone is relatively short. This problem may be solved by the combinated pre-ozonation and pre-chlorination process.

COMPARING AND STUDYING OF DIFFERENT TYPES CARBON IN O3/BAC PRODUCTION TREATMENT

Comparison of O3 - BAC Combination and Conventional Processes on Removal of Pollutants for Treating Drinking Water

Unraveling Dissolved Organic Matter in Drinking Water Through Integrated Ozonation/ceramic Membrane and Biological Activated Carbon Process Using FT-ICR MS.

Removal Efficiency of Combined Treatment Process on Raw Water with High Ammonia Nitrogen and High Organic Pollutants

Comparison of O3-BAC and GAC for Removing Micropollutants from Drinking Water

Comparison of Performance between O_3-BAC and GAC Processes

Comparison of Fe–Mn Enhanced Coagulation and O3-BAC for Removing Natural Organic Matter from Source Waters: a Case Study

COMPARISON BETWEEN UV/O_3-BAC AND O_3-BAC FOR TREATMENT OF ORGANIC POLLUTANTS IN THE EFFLUENT FROM SEWAGE TREATMENT PLANT

Fate of Organic Pollutants in a Full-Scale Drinking Water Treatment Plant Using O3-BAC

Comparison of Seven Kinds of Drinking Water Treatment Processes to Enhance Organic Material Removal: a Pilot Test.

The comprehensive evaluation model and optimization selection of activated carbon in the O3-BAC treatment process

Selection Of Activated Carbon In Advanced Water Treatment By O-3-Bac

Comparison of ozone-based AOPs on the removal of organic matter from the secondary biochemical effluent of coking wastewater

Pilot-scale Study on O_3/BAC Process for Advanced Treatment of Miyun Reservoir Water

A Study of Effect of Ozone-Active Carbon Process in Feed Water Treatment

Influence of ozone/ceramic membrane on performance and microbial community in biological activated carbon filtration

Pretreatment of Light-polluted Raw Water by Biological Active Carbon Expended Bed

Comparison Of Ac/O-3-Bac And O-3-Bac Processes For Removing Organic Pollutants In Secondary Effluent

[Ozone-Biological Activated Carbon for Advanced Removal of Typical Persistent Organic Pollutants from Micro-Polluted Source Water in the Yangtze Delta Region].

Effect of Ozone on the Performance of A Hybrid Ceramic Membrane-Biological Activated Carbon Process

[Controlling of Biological Stability in Drinking Water by Purification Processes].