Abstract:The design of preform plays a key role in the precision forming of complex-shaped components with thin walls and large areas of webs. In the present work, two typical kinds of box-shaped forgings of 5A06 aluminum-alloy were selected as research objects, including the symmetric rectangular base forging and the asymmetric arc cover forging. The preform design method was proposed during isothermal back extrusion of boxlike forging, in which metal flow law of billets with equal thickness revealed by finite element (FE) simulation was quite useful for the billet design. The simulation results successfully predicted folding defects at the bottom of the base forging and inadequate filling at lateral walls of the cover forging, which were caused by inappropriate billet geometry and loading mode. According to the simulation and experimental results, the reverse loading of the rectangular base billet with variable thickness avoided the appearance of the folding at the bottom. The base forging without defects was formed successfully under reverse loading by using the billet with four 60 mm × 90 mm × 5 mm bosses and 15° transition surfaces, while the cover forging without defects was formed successfully by using the billet with 15° transition surfaces and two bosses whose heights were both 48 mm. Both the two boxlike forgings formed with modified billets exhibited perfect distribution of flow lines. Meanwhile, the lateral walls and webs possessed higher tensile strength, higher elongation, finer and more elongated grains than raw material. Therefore, the thermal backward extrusion was an effective process to precisely form complexly boxlike rib/web workpiece.

Study on Warm and Cold Extrusion of Cup-shaped Part

Study on Metal Forming Patterns of the Ultrasonic Vibration Assisted Upset-extruding Process

MICROSTRUCTURES AND PROPERTIES OF HOT-EXTRUDED SiCW/6061Al COMPOSITES

Simulation and Experimental Analysis on Non-circular Cross-section Parts Residual Wall Thickness of Water-assisted Injection Molding

Combined Warm Extrusion Process and Its Die of Bearing Inner and Outer Rings

Study on lubricants and cooling method for warm extrusion

Research on compound forming process of cup-shaped part with inner gear

Numerical Simulation and Process Optimization of Internal Thread Cold Extrusion Process

Simulation of Compound Cold Extrusion Al-Zn-Mg-Cu Alumium Alloys

Numerical simulation and experimental study on cold extrusion process for clutch outer gear hub with inner tooth shapes

Investigation of Metal Extrusion Forming Through Steadily Rotating Container

Investigation on friction characteristics of micro double cup extrusion assisted by different ultrasonic vibration modes

Analysis on the Process of Cold Enclosed Precision Forging of Starlike Sleeve

Preform Design and Microstructure-Property Analysis for Isothermal Extrusion of Complex Box-Shaped Components

Research on the Mechanism and Processability of Roll Forming

Influence of Process Parameters on Wedging-Spinning of Conical Cup Parts with Bottom Flanges

Hot micro-extrusion experimentation and die design

STUDY ON TEMPERATURE FIELD OF CONTINUOUS EXTRUSION FORMING PROCESS

Extrusion forming technology applied in die design of plug extremity

Experimental and Numerical Study on Friction and Wear Performance of Hot Extrusion Die Materials

The Design and Simulation of Vibrate Impact Extrusion Die