Research on Hot Extrusion and Cold Drawing for Micro-Tube of Magnesium Alloys
FANG Gang,YAN Kai-min,ZENG Pan,AI Wei-jiang
DOI: https://doi.org/10.3969/j.issn.1007-2012.2013.05.003
2013-01-01
Abstract:As biodegradable materials,the magnesium alloys get more and more attentions in the application of implants for surgery,for example,vascular stents.Forming of tubular billet is an indispensible step in the stent fabrication chain.Therefore, the reliable forming methods have to be researched and determined for the production of the micro tube of magnesium alloy.The present research proposes a serial of processes to form a micro tube of magnesium alloy,including the hot indirect extrusion and the cold drawing.An in-house micro hydraulic press with measurement units of pressure,displacement and temperature was developed to extrude the tube of magnesium alloy.By the indirect extrusion of ZK30magnesium alloy,some tubular billets with an outer diameter of 3.14mm and a wall thickness of 0.32mm were obtained.Subsequently,the cold drawing was used to further forming to get the thinner tube.The drawing experiments were carried out on the specialized drawing dies and the tool sets mounted a universal material testing machine.Through four passes,some tubes with an outer diameter of 2.90mm and a wall thickness of 0.27mm were formed.The formed tubes will be used to the further precision forming and laser slitting of vascular stents designed to the mechanical and bio tests.