Abstract:Inductively coupled plasma generator is one of the core components of the near-space high-speed target plasma electromagnetic scientific experimental research device, which is often used to simulate high enthalpy and high speed plasma sheath environment. In order to study the discharge characteristics of inductively coupled plasma generator under high power, radio frequency and medium pressure, the numerical simulation and experiment are combined to study its internal heat transfer and flow characteristics in this paper. Based on the local thermodynamic equilibrium conditions, the numerical simulation of large-scale radio frequency and medium pressure inductively coupled plasma with a power of 100–400 kW is carried out through the multi-field coupling of flow, electromagnetic and temperature field, and verified by light intensity and spectrum experiment. The results show that the electromagnetic field distribution in the high-power thermal balance inductively coupled plasma generator is similar to that of the small- and medium-sized power plasma generator. The discharge energy dissipation occurs mainly in the area where the induction coil is located. The temperature of the inner wall of the quartz tube is higher at the coil location than in other areas, and the plasma has a ring-shaped high-temperature structure. The outer wall of the quartz tube is set to be the boundary condition of heat flux for simulating the temperature change of the quartz tube under cold blowing. This setting is in coincidence with factual situations. The wall temperature of the quartz tube at the entrance and at the induction coil section are found to be relatively high. When the large-size inductively coupled plasma generator works, an obvious return vortex is generated at the entrance due to the temperature difference and the electromagnetic pumping effect, and the exit velocity increases slightly with the increase of power. At the same time, the discharge experiment under the corresponding conditions shows that there is found a ring structure with bright edges and dark centers in the axial image of the argon discharge. Moreover, the emission spectrum of argon plasma is measured through the spectrum diagnosis system and the spatial distribution of the generator electron temperature is obtained. The light intensity of the discharge image and the electron temperature measured by the spectrum are found to be in comparative coincidence with the COMSOL simulation temperature result, demonstrating the validity of the numerical simulation results under thermodynamic equilibrium conditions. The numerical simulation results in this paper are also applicable to the optimization design and temperature resistance evaluation of the inductively coupled plasma generator.

Simulations and experimental results for a microwave plasma system

New Experimental Results Obtained using Microwave Reflectometry in HL-2 A Tokamak

Atmospheric Pressure Microwave Plasma System with Ring Waveguide

Microwave field distribution in a new atmospheric pressure microwave plasma (APMP) system

A Microwave Air Plasma Source under Atmospheric Pressure

A Microwave Plasma System with Ring Waveguide

The generation and characteristic study of large-volume microwave plasma produced with parellel rectangular waveguides

Simulation on heating of plasma in a magnetic field with electrostatic wave

Electromagnetic Characteristics of High Pressure Microwave Plasma Generator Based on a Cylindrical Resonant Cavity

Simulation and Design of New Microwae Plasma Source with Slotted Straight Waveguides

A Large-Volume Microwave Plasma Source Based on Parallel Rectangular Waveguides at Low Pressures

A Large-Volume Open-Air Microwave Plasma Based on Parallel Multislot Rectangular Waveguides

Development of Open Type Microwave Plasma Source

A New Atmospheric Pressure Microwave Plasma Source （APMPS）

Cold-model experimental and simulation research of reaction zone of a microwave plasma torch

Experimental Study on the Emission Spectra of Microwave Plasma at Atmospheric Pressure

Investigation of a Novel Atmospheric Pressure Microwave Cold Plasma Torch and Its Characteristics

Numerical Simulation and Experimental Study of High-Power Thermal Equilibrium Inductively Coupled Plasma

Ionization process and distinctive characteristic of atmospheric pressure cold plasma jet driven resonantly by microwave pulses

Microwave Diagnostics of Cold Atmospheric Pressure Plasma Jets Based on the Radiation Pattern Measurements

A Large-Volume and High-Efficient Microwave Plasma Source with Planes Slotted Antenna