Abstract:Schematic illustration of High performance PLA/PCL/talc composites preparation. Blending with ductile polycaprolactone (PCL) is one of the common toughening methods for polylactic acid (PLA). However, it seems inevitable to experience a trade‐off in mechanical strength and thermal stability of PLA. Therefore, this study aimed to improve the mechanical and thermal properties of PLA/PCL blends by adding different contents of talc (0–10 wt%) and conducting annealing treatments. Interestingly, the maximum tensile strength (52.04 MPa), elongation at break (83.51%), and impact strength (6.05 kJ/m2) were achieved by incorporating 2.5 wt% talc into the blends without annealing. Meanwhile, the addition of just 1 wt% talc shortened the semi‐crystallization time of PLA to one‐third of the neat PLA at 100°C. Particularly, after annealing treatment, the crystallinity of PLA increased to 32.1%, and the Vicat softening temperature reached as high as 133.3°C with 2.5 wt% talc. Importantly, the increase in crystallinity did not compromise the toughness of PLA composites but significantly enhanced the impact strength to 8.91 kJ/m2. This study provides an updated understanding of the relationship between toughness and crystallinity in PLA composites. Highlights Thermo‐resistance of polylactic acid (PLA) composite increases to 133.3°C. Talc aids nucleation and promotes PLA crystallization. Increased crystallinity and high toughness are simultaneously realized. Adding 1 wt% talc reduced PLA semi‐crystallization time by one‐third. Crystal transformation and sea‐islands structure are vital for reinforcements.

MICRO-STRUCTURE AND MECHANICAL PROPERTIES OF IN-SITU POLYMERIZATION-MODIFIED TALC/PP COMPOSITES

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Preparation and properties of PLA/PBAT composites modified with different filler particles

Effects Of Talcum Powder(Talc) And Compounding Sequence On The Morphology And Mechanical Properties Of Pa6/Pp/Mapp Blend

Additive Effects of N,N,N′,N′ -Tetraalkyl Terephthalamide on Crystalline Morphology and Mechanical Properties of Polypropylene

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Research on PA66/PET/Talc Composite

Novel derivatives of deoxycholic acid bearing aliphatic or cyclic diamine moieties at the C-3 position: Synthesis and evaluation of anti-proliferative activity.

Effect of Dopamine Modified Talcum Powder on the Crystallization Behavior and Rheological Properties of PLA/PBS Blends

Influence of N,N,N′,N′-tetraalkyl terephthalamide on isothermal crystallization kinetics and morphology evolution of polypropylene

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

A strategy to prepare high‐robust and ultra‐tough polylactic acid/polycaprolactone/talc composites with thermo‐resistance

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Surface modification of talc powder by silane functionalized polycarboxylates and its effect on the performance of polyvinyl chloride composite

Effect of in Situ Reaction on Thermal and Mechanical Properties of Polylactide/Talc Composites

Effects of PPTA-pulp on the Structure and Properties of PP/CaCO_3 Composites

Modification of Polypropylene with Composite Nucleating Agents Containing 2,2-Methylene-bis-(4, 6-di-t-butylphenylene) Phosphate/Attapulgite/Silica Nano-particles

Synthesis and characterization of polycarbonate/ABS/montmorillonite nanocomposites