Abstract:Schematic illustration of High performance PLA/PCL/talc composites preparation. Blending with ductile polycaprolactone (PCL) is one of the common toughening methods for polylactic acid (PLA). However, it seems inevitable to experience a trade‐off in mechanical strength and thermal stability of PLA. Therefore, this study aimed to improve the mechanical and thermal properties of PLA/PCL blends by adding different contents of talc (0–10 wt%) and conducting annealing treatments. Interestingly, the maximum tensile strength (52.04 MPa), elongation at break (83.51%), and impact strength (6.05 kJ/m2) were achieved by incorporating 2.5 wt% talc into the blends without annealing. Meanwhile, the addition of just 1 wt% talc shortened the semi‐crystallization time of PLA to one‐third of the neat PLA at 100°C. Particularly, after annealing treatment, the crystallinity of PLA increased to 32.1%, and the Vicat softening temperature reached as high as 133.3°C with 2.5 wt% talc. Importantly, the increase in crystallinity did not compromise the toughness of PLA composites but significantly enhanced the impact strength to 8.91 kJ/m2. This study provides an updated understanding of the relationship between toughness and crystallinity in PLA composites. Highlights Thermo‐resistance of polylactic acid (PLA) composite increases to 133.3°C. Talc aids nucleation and promotes PLA crystallization. Increased crystallinity and high toughness are simultaneously realized. Adding 1 wt% talc reduced PLA semi‐crystallization time by one‐third. Crystal transformation and sea‐islands structure are vital for reinforcements.

Research on PA66/PET/Talc Composite

Rheological Properties of PET/PA66/Liquid Crystalline Copolyesteramide Blends

Mutual Nucleating and Crystallization Behavior of Poly (ethylene Terephthalate)/polyamide 66 Blends

Additive Effects of N,N,N′,N′ -Tetraalkyl Terephthalamide on Crystalline Morphology and Mechanical Properties of Polypropylene

Effects Of Talcum Powder(Talc) And Compounding Sequence On The Morphology And Mechanical Properties Of Pa6/Pp/Mapp Blend

Effects of talc on the mechanical and thermal properties of polylactide

The Effect of Talc on the Mechanical, Crystallization and Foaming Properties of Poly(Lactic Acid)

Research on Recycled PET/PA6 Blend

Toughening Behavior and Morphology Study of PA6/thermal Liquid Crystalline Polyamide Blends

Thermal and Mechanical Properties of bio‐based Polyamide 56/6 Filled with Talc

Preparation and Properties of Poly(Ethylene Terephthalate)/Poly(Butylene Terephthalate) Alloys with High Toughness

Study on Solvent Resistance and Crystallization Behavior of PCA/PA6

A strategy to prepare high‐robust and ultra‐tough polylactic acid/polycaprolactone/talc composites with thermo‐resistance

Study on Crystal Behavior of PA-66 with Thermotropic Liquid Crystalline Copolyester

Improved thermal properties by controlling selective distribution of AlN and MWCNT in immiscible polycarbonate (PC)/Polyamide 66 (PA66) composites

Influence Of Different Compatibilizers On The Morphology And Properties Of Pa6/Pet/Glass Fiber Composites

Morphology and Properties of Poly(ethylene Terephthalate)/polycarbonate Alloy Toughened with Different Kinds of Elastomers

Effect of Talc on Thermal Stability and Flame Retardancy of Polycarbonate/psbpbp Composite

Effect of Poly(Acrylic Acid)-Modified Poly(Ethylene Terephthalate) on Improving the Integrated Mechanical Properties of Poly(Ethylene Terephthalate)/Elastomer Blend

Effect Of Order Of Mixing On Morphology And Thermal Properties Of The Compatibilized Pbt And Abs Alloys/Omt Nanocomposites

STUDY ON RECYCLED PET/PA66 COMPOSITE