Abstract:In this paper, we develop high aspect ratio nanofibrils from a polycaprolactone-based thermoplastic polyurethane (TPU) and evaluate their performance as a toughening agent. Poly(methyl methacrylate) (PMMA) was chosen as the matrix material because of its inherent brittleness and low resistance to sudden shocks and impact. We show that the addition of as little as 3 wt % of TPU nanofibrils with an average diameter of ∼98 nm and very high aspect ratio can significantly improve both the tensile toughness (∼212%) and impact strength (∼40%) of the chosen matrix (i.e., PMMA) without compromising its original strength, stiffness, and transparency. We compare the performance of TPU nanofibrils with TPU spherical particles─the form TPU typically manifests into when melt-mixed with an immiscible polymer. Our findings highlight that the structure of TPU plays a crucial role in determining the critical concentration of TPU needed for the brittle-ductile transition of the matrix. We also provide new and valuable insights into the unique interfacial interaction (i.e., formation of fibrillar bridges) observed between the PMMA matrix and TPU. We also show that the inclusion of 3 wt % of TPU nanofibrils can notably enhance resistance to creep deformation, even at temperatures close to the glass transition temperature of the matrix. Finally, we evaluate recyclability and demonstrate that the composite containing 3 wt % of TPU nanofibrils can be mechanically recycled without losing any properties. The proposed TPU nanofibrils can withstand repeated reprocessing at temperatures up to 190 °C due to their very high melting point and thermal stability. This presents the opportunity for them to be utilized not just with amorphous PMMA, but also with a range of other materials that can be processed at or below this temperature to remarkably improve their toughness without sacrificing strength and stiffness.

Significant Enhancement of Mechanical and Thermal Properties of Thermoplastic Polyester Elastomer by Polymer Blending and Nanoinclusion

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Effect of addition of compatibilizer on mechanical, thermal and thermo-mechanical behavior of a polymer blend (PBT/ PBT(G)/ PTT) composite

Rheology of Poly(lactic Acid)/poly(trimethylene Terephthalate) Blends Compatibilized by Clay or Maleic Anhydride-Grafted Poly(ethylene-Octene) Elastomer

Influence of polyether ether ketone particles on thermal characteristics of carbon/epoxy composite

Fabrication of Thermoplastic Polyester Elastomer/layered Zinc Hydroxide Nitrate Nanocomposites with Enhanced Thermal, Mechanical and Combustion Properties

Mechanical and thermal performance of PEEK/PEI blend matrix reinforced with surface modified halloysite nanotubes

Thermal and Mechanical Properties of Poly(butylene Terephthalate)/epoxy Blends

Phase morphology, mechanical, and thermal properties of fiber-reinforced thermoplastic elastomer: Effects of blend composition and compatibilization

Fabrication of poly(ethylene terephthalate)/polypropylene-based elastomer blends with balanced stiffness-toughness: The effect of reactive compatibilization

Improving the Toughness and Thermal Resistance of Polyoxymethylene/Poly(lactic acid) Blends: Evaluation of Structure-Properties Correlation for Reactive Processing

The synergistic reinforcing effects of halloysite nanotube particles and polyolefin elastomer-grafted-maleic anhydride compatibilizer on melt and solid viscoelastic properties of polylactic acid/ polyolefin elastomer blends

Investigation on the mechanical, thermal and electrical properties of polyoxymethylene composites modified by thermoplastic polyurethane elastomer and carbon fiber

Thermo-Blending of Biobased Poly(propylene 2,5-furan dicarboxylate) and Poly(lactic acid) with Improved Mechanical Performance

Tailoring the mechanical and thermal properties of polylactic acid-based bionanocomposite films using halloysite nanotubes and polyethylene glycol by solvent casting process

Design, processing, 3D/4D printing, and characterization of the novel PETG–PBAT blends

Highly Tough Yet Stiff, Transparent, and Recyclable PMMA Nanocomposites Incorporating TPU Nanofibril Networks with High Thermal Stability and Strong Interfacial Adhesion

A Novel Biobased High Toughness PBAT/PEF Blends: Morphology, Thermal Properties, Crystal Structure and Mechanical Properties

Morphology and properties of high molecular weight polyisobutylene and thermoplastic polyurethane elastomer

The Study on the Microstructures and High Performances of Melt Blending Polyurethane/Multiwalled Carbon Nanotubes Composites

Thermal and Mechanical Properties of Ultra High Molecular Weight Polyethylene Fiber Reinforced High-Density Polyethylene Homocomposites: Effect of Processing Condition and Nanoclay Addition