Abstract:International Journal of Modern Physics B, Ahead of Print. This study investigates the effects of incorporating halloysite nanotubes (HNTs) into polyetherimide (PEI) adhesive for carbon fiber/polyetherketoneketone (CF/PEKK) composite joints. The CF/PEKK substrate is fabricated through an oven consolidation process, while PEI adhesive films with varying HNTs loadings (0.5, 1 and 3[math]wt.%) are prepared using solvent casting with [math]-butyrolactone. Homogeneous dispersion of HNTs in PEI is achieved through magnetic stirring and IR heating. The resulting film is hot pressed to form a 100[math][math]m thick film, and adhesive lap shear joint specimens are manufactured through oven consolidation. Morphology and dispersion of HNTs in PEI are analyzed using SEM and EDS, revealing favorable dispersion at 0.5[math]wt.% HNTs and aggregation at higher loadings. Differential scanning calorimetry (DSC) is employed to study the glass transition temperature (Tg) of PEI, showing decreased Tg for solvent-cast PEI and increased Tg with HNTs incorporation. This increase is attributed to the constrained mobility of polymer chains due to HNTs' influence. Lap shear strength (LSS) is evaluated, demonstrating enhancement with HNTs incorporation: 0.5[math]wt.% HNTs (+12.5%) > 1[math]wt.% HNTs (+8.33%) > Pure PEI > 3[math]wt.% HNTs (−12.5%). The study attributes this enhancement to HNTs' reinforcement and chemical interactions with PEKK. Aggregation tendencies at 3[math]wt.% HNTs lead to decreased LSS. SEM-EDS analysis of fractured specimens indicates a multifaceted bonding joint interface involving PEKK, PEI and HNTs. CF/PEKK composites show adhesive, cohesive and adherend failure modes, with adherend failure being dominant. Notably, fabric-like textures and plastic deformations in PEI with 0.5[math]wt.% HNTs contribute to enhanced LSS, while higher HNTs content leads to cohesive failure due to aggregation. This study provides insights into optimizing composite adhesive systems by harnessing nanotube reinforcement and controlling dispersion, thereby influencing interfacial strength.

Mechanical and thermal performance of PEEK/PEI blend matrix reinforced with surface modified halloysite nanotubes

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Significant Enhancement of Mechanical and Thermal Properties of Thermoplastic Polyester Elastomer by Polymer Blending and Nanoinclusion

Comparative study on mechanical, thermal, and morphological properties of nanocomposites based on polyetherimide (PEI)/silicone rubber reinforced with different nanofillers

Synergistic effects of graphene nanoparticles on the thermomechanical properties of PEEK-HNTs nanocomposites

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

High‐performance PPS/PEEK blend and its composites with milled carbon fiber: Study on their mechanical, thermal and dielectric properties

The Role of Halloy Site on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene-Oxide)/halloysite Nanocomposites

Interfacial and mechanical performance of chemically modified high content MWCNT/PEEK thermoplastic composites

A chemically modified MWCNT/PEEK multiscale thermoplastic composites: Forming, mechanical performance, and application

Effects of halloysite nanotubes modified by organic phosphate on the performance improvement for polypropylene

mechanical properties of CNT / PEEK nanocomposites

Influence of polyether ether ketone particles on thermal characteristics of carbon/epoxy composite

Effect of MMT‐HNT Hybrid Nanoclay on Properties of UHMWPE Composite

Engineering the Mechanical Properties of CNT/PEEK Nanocomposites

Synergistically Improving the Thermal Conductivity and Mechanical Strength of PEEK/MWCNT Nanocomposites by Functionalizing the Matrix with Fluorene Groups

Structure and Performance of Polyamide 6/Halloysite Nanotubes Nanocomposites

Thermal Annealing Induced Enhancements of Electrical Conductivities and Mechanism for Multiwalled Carbon Nanotubes Filled Poly(Ethylene-Co-Hexene) Composites

Effect of functionalization of multiwalled carbon nanotubes with aminated poly(ether sulfone) on thermal and mechanical properties of poly(ether ether ketone) nanocomposites

Lap shear properties of CF/PEKK composites through nanoparticle-enhanced adhesive joints