Abstract:In this thesis, to reinforce and soften PP plastics, thermotropic liquid crystalline polymer (TLCP) and nano-CaCO3 were used. The PP/TLCP/CaCO3 in-situ hybrid materials were prepared in a twin-screw extruder respectively by one-step and two-step method. The effect of nano-CaCO3 adding method on PP/TLCP/CaCO3 in-situ hybrid materials was investigated. Polarization optical microscope (POM) and differential scanning calorimeter (DSC) measurements showed that: nano-CaCO3 play an important role in PP/TLCP system heterogeneous nucleation, and CaCO3 particles can increase the crystal growth rate of PP matrix more than the contribution of the improvement of crystallinity. Field emission scanning electron microscope (FESEM) observation revealed that the nano-CaCO3 enriched in the PP matrix though one-step method, which helped to promote the TLCP forming fibrils, therefore the tensile strength of one-step preparation sample was higher relatively. Mechanical measurements revealed that under the condition of the same proportion of PP/TLCP/CaCO3/PP-g-MAH=85/5/4/6, the mechanical properties of the hybrid materials prepared by one-step method were better than which of two-step method, the tensile strength of the one-step sample was 36.62 MPa, increased 2.95% more than which of two-step sample, the elongation at break of one-step method sample was 35.12%, increased 76.4%: the impact strength was 3.86 kJ/m(2), and increased 4.9%.

Effects of PPTA-pulp on the Structure and Properties of PP/CaCO_3 Composites

Composites of Polypropylene Reinforced with Ultrafine Bamboo-char: Morphology, Mechanical and Thermal Properties

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Study on the Preparation and Properties of Caco3/Polypropylene Composite Materials

The Influence of Calcium Carbonate on the Mechanical Properties and Phase Morphology of PA6/PP Blend

Study on Microstructue and Mechanical Properties of Nano CaCO3/PPS Composite

Influences of Ternary Graft Copolymers on the Morphology and Properties of Polypropylene/Calcium Carbonate Composites

Effect of Aminated Polyphenylene Sulfide on the Mechanical Properties of Short Carbon Fiber Reinforced Polyphenylene Sulfide Composites

Preparation and properties of PLA/PBAT composites modified with different filler particles

Effect of carboxylic polyphenylene sulfide on the micromechanical properties of polyphenylene sulfide/carbon fiber composites

Effect of Maleic‐anhydride‐grafted Polypropylene As a Compatibilizer on the Properties of Polypropylene/(modified Carbon Black) Composites

Effect of Surface Modification of CaCO_3 on Mechanical Properties of PP/CaCO_3 Composite

Effect of Nano-Caco3 on Properties of Pp/Tlcp/Caco3 In-Situ Hybrid Materials

Study on the Properties and Structure of Polypropylene Modified with Nano-Sized CaCO_3

PREPARATION PROCESS AND INTERFACE MODIFICATION ON THE MECHANICAL PROPERTIES OF BAMBOO FIBER/ POLYPROPYLENE CARBONATE COMPOSITES

Morphology and Properties of Short R-PET Fiber Reinforced PP Composites

Effect of Properties of CaCO3 Nanoparticles on Interface and Properties of Poly(vinyl Chloride) Composites

Crystal Behavior and Mechanical Properties of PP Composites Filled with Carbon Black Grafted by Organic Small Molecules