Abstract:The picture shows vermiculite modified with silane coupling agent KH570. VMT/PBAT and OVMT/PBAT composite films were prepared by solution method. The structure, thermal properties, crystalline properties, rheological properties, cross‐sectional microstructure, and tensile properties of the pure PBAT films, VMT/PBAT, and OVMT/PBAT composite films were tested and comparatively analyzed. The results showed that the OVMT was uniformly dispersed in the matrix in the composites with the addition of modifiers, the thermal stability of the composite films was relatively improved, the initial decomposition temperature of the OVMT/PBAT composite films was about 2–4°C higher than that of the VMT/PBAT composite films, and the complex viscosity was also greater with improved viscoelasticity. The mechanical properties of the OVMT/PBAT‐20% composite films were higher than those of the VMT/PBAT composite films. The mechanical properties of the OVMT/PBAT‐20% films were 35.9% higher in tensile strength and 10.8% higher in elongation at break than the VMT/PBAT‐20% films. Vermiculite (VMT) was used as a filler and it was modified with silane coupling agent KH570 to produce OVMT. VMT/PBAT and OVMT/PBAT composite films were prepared using the solution method using polybutylene terephthalate (PBAT) as a matrix. The structure, thermal properties, crystalline properties, rheological properties, cross‐sectional microstructure, and tensile properties and antibacterial properties of the pure PBAT film, VMT/PBAT, and OVMT/PBAT composite films were tested, including comparative analysis. The results showed that VMT was successfully modified with silane coupling agent to produce OVMT. Furthermore, the thermal stability of VMT/PBAT and OVMT/PBAT composite films decreased compared with pure PBAT film. As the content of VMT and OVMT increases, the energy storage modulus and loss modulus of VMT/PBAT and OVMT/PBAT composite films increase, while the loss factor, complex viscosity and crystallinity gradually decrease. Additionally, the tensile strength and elongation at break of VMT/PBAT and OVMT/PBAT composite films decrease. All three films had no effect on Staphylococcus aureus or Escherichia coli. The modification of VMT with the silane coupling agent KH570 improved the compatibility of OVMT with PBAT, resulting in improved mechanical properties of the OVMT/PBAT composite film compared with the VMT/PBAT composite film. The mechanical properties of the OVMT/PBAT‐20% composite film increased by 35.9% in tensile strength and 10.8% in elongation at break compared with the VMT/PBAT‐20% composite film. Highlights VMT successfully modified with silane coupling agent to produce OVMT. The modification promotes the compatibility of the filler with PBAT. VMT modification helps to improve the mechanical properties of composite materials. Vermiculite modification helps to improve the toughness of composite materials.

Surface modification of talc powder by silane functionalized polycarboxylates and its effect on the performance of polyvinyl chloride composite

Impact of Chemical Modification of Bamboo Fibers on Properties of Fiber Reinforced PVC Composites

Synthesis of ACR/nanometer SiO2 Composite Particles and Their Tonghening Effect on PVC

Preparation and characterization of poly(L-lactide)-co-poly(trimethylene carbonate)/talc film

Structure and Properties of Poly(vinyl Chloride)/dodecyl Sulfonate-pillared Hydrotalcite Composites

Preparation and Property of Silane-crosslinked PVC

Effect of triazine based silane coupling agent modified LDH on the thermal and mechanical properties of PVC based nanocomposites

Modification Research of Nanometer TiO2 Coating and Its Effect on Properties of PVC

Synthesis of Poly(methyl (trifluoropropyl) Siloxane) and Its Crosslinking Characteristics

Surface Modification of Shell Waste and Its Application in Polypropylene Composites

Formulation optimization and performance enhancement of polyvinyl chloride-silica micropowder composites with a promising flooring application

Synthesis of Poly[(vinyl Chloride)-Co-(vinyl Polydimethylsiloxane)] Via Precipitation Polymerization and Its Lubrication Behavior in the PVC Matrix

Preparation and properties of silane coupling agent modified vermiculite and its composite films

Surface Modification of Calcined Kaolinite for Enhanced Solvent Dispersion and Mechanical Properties in Polybutylene Adipate/Terephthalate Composites

Synthesis of poly(vinyl chloride)-<i>co</i>-poly(acrylic acid) by precipitation polymerization and its usage as CaCO<sub>3</sub> modifier in rigid PVC composites

Improved properties of poly(butylene adipate‐co‐terephthalate)/calcium carbonate films through silane modification

Effect of interfacial sacrificial bonds on the vulcanization and mechanical properties of styrene butadiene rubber/talcum powder composites

Effect of lanthanum on thermal and mechanical properties of modified polyvinyl chloride film

Effect of coconut fibers chemically modified with alkoxysilanes on the crystallization, thermal, and dynamic mechanical properties of poly(lactic acid) composites

Organically modified mesoporous silica as a performance additive in tubular quenched polypropylene films

Influence of surface modification on thermal, adhesive properties and impact behavior of TPU films for laminated glass