Abstract:The toughening effect of styrene–butadiene rubber (SBR) rubber and the reinforcing effect of silicon carbide (SiC) nanoparticles on mechanical properties and microstructure of PP/SBR/SIC composites was investigated. Polypropylene is a useful and widely consumed thermoplastic with very good properties that can be mixed with a combination of rubber and nanoparticles in order to eliminate its shortcomings. In this paper, the simultaneous combination of both the toughening effect of styrene–butadiene rubber (SBR) and the reinforcing effect of silicon carbide (SiC) nanoparticles were investigated in polypropylene matrix. Mechanical properties (tensile and impact strength [TS and IS]) of compounds were analyzed using the central composite design approach in Design‐Expert software. With two factors for input variables of SBR and SiC weight percentages, and their five levels (5, 10, 15, 20, and 25) and (0, 1.5, 3, 4.5, and 6), respectively, the central composite design approach employs 11 experiments for creation of models and the analysis of variance investigations with two output responses of TS and IS. Statistical results revealed that SBR and SiC contents had a significant effect on TS, IS, and the microstructure of compounds, as confirmed by scanning electron microscopy and energy‐dispersive spectroscopy images. To maximize all mechanical properties simultaneously with desirability functions, TS and IS of the optimum sample were computed to be 21.98 MPa and 8.66 kJ/m2 in amounts of 13.45 and 2.80 weight percentage (wt%) of SBR and SiC, respectively. Highlights By increasing silicon carbide (SiC) in polypropylene/styrene–butadiene rubber (SBR), tensile strength decreases after a peak due to agglomeration effect. By increasing SiC in polypropylene/SBR, impact strength decreases after a peak due to agglomeration effect. By increasing SiC, the rubber particles' dimensions decrease according to scanning electron microscopy analysis. Simultaneous maximum of tensile strength and impact strength are 21.98 MPa and 8.66 KJ/m2, respectively. Optimum value of SBR and SiC in above maximums are 13.45 and 2.8 wt%, respectively.

Effect of interfacial sacrificial bonds on the vulcanization and mechanical properties of styrene butadiene rubber/talcum powder composites

MONTMORILLONITE REINFORCED SBR AND EFFECT ON THE VULCANIZATION OF RUBBER

Application of Composite Powders Recycled from Graphite Tailings in Styrene-Butadiene Rubber

Grafting Polybutadiene onto Surfaces of Talcum Powder by Spray-Drying Technology and Modification of EPDM Rubber

Synergistic Effect of Sbs and Trimethylopropane Trimethacrylate (tmptma) on Dynamically Vulcanized Sebs/Pp Blends

Preparation and properties of SBR/PPTA nanocomposite via in‐situ interfacial polycondensation

Improving the mechanical and abrasion properties of silica-reinforced styrene-butadiene rubber composites by optimizing the concentrations of compatibilizers

Preparation and properties of styrene-butadiene rubber/silane coupling agent modified boehmite composites

Structural and Mechanical Properties of Styrene–butadiene Rubber/silica Composites with an Interface Modified In-Situ Using a Novel Hindered Phenol Antioxidant and Its Samarium Complex

Reinforcing Styrene‐butadiene Rubber Composites by Constructing Multiple Interaction Between Rubber and Silica

The optimization of mechanical properties of polypropylene/styrene butadiene rubber/silicon carbide nanocomposites using response surface methodology

Use of Naturally Small Molecule As an Intelligent Interfacial Modifier for Strengthening and Toughening Silica-Filled Rubber Composite

Enhanced Mechanical and Processing Property of Styrene-butadiene Rubber Composites with Novel Silica-supported Reactive Processing Additive

Effect of Fillers and Additives on the Properties of SBR Vulcanizates

Grafting polyisoprene onto surfaces of kaolin by spray drying technology and modification of styrene–butadiene rubber

Enhanced Interfacial and Mechanical Performance of Styrene-Butadiene Rubber/silica Composites Compatibilized by Soybean Oil Derived Silanized Plasticization

Effects of liquid polyisoprene and magnesium oxide on the mechanical properties of styrene‐butadiene rubber/carbon nanotubes composite

Utilization of shield powder as a novel reinforcing and compatibilizing filler in styrene–butadiene rubber (SBR) composites

Synergistic Effect of Compound Rubber and SiO2 Nanoparticles on Low-Temperature Toughening and Balanced Stiffness-Toughness of Random Copolymer Polypropylene Nanocomposites

Dual functions of inverse vulcanized copolymers as both vulcanizator and interfacial modifier for improving the mechanical properties of silica reinforced rubber composites

Promoted Dispersion Of Silica And Interfacial Strength In Rubber/Silica Composites By Grafting With Oniums