Abstract:Synergistic effects of silane‐modified carbon black and nano‐silica hybrid fillers on the performance of EPDM rubber composites. This study assesses the effectiveness of a specially developed surface‐modified carbon black, both on its own and in combination with nano‐silica, as a hybrid filler for ethylene–propylene–diene monomer (EPDM) rubber compounds. The modification process, which included treatment with a silane coupling agent, resulted in enhanced curing characteristics. The ∆Torque values for compounds incorporating the modified carbon black exceeded those of other formulations by 25.85%. Scanning electron microscopy (SEM) analysis demonstrated improved filler dispersion and better compatibility between rubber and filler due to the surface modification. The silane‐modified carbon black showed considerable enhancements in mechanical properties, particularly in tear resistance, with increases in tensile and tear strength of 22.46% and 34.86%, respectively, following surface treatment. Dynamic mechanical analysis (DMA) indicated the influence of both surface modification and filler type, revealing that the combination of modified carbon black and nano‐silica achieved a reduction in rolling resistance of 20.41% and enhanced ice and wet grip performance by 7.95%. Additionally, modified carbon black displayed varying effects on the glass transition temperature. Thermal gravimetric analysis (TGA) confirmed that the thermal stability of the compounds was consistent, while solvent resistance improved with surface modification, as shown by swelling ratios. Thermodynamic analysis indicated that the surface modification of carbon black positively influences the elasticity and chain mobility of the rubber compounds studied. In conclusion, the careful selection and optimization of filler materials and their modifications are essential for customizing the properties of rubber compounds to satisfy specific performance criteria and applications. Highlights Promising EPDM compounds were prepared with Silane‐Modified CB and Nano‐Silica. Silane‐modified CB effectively improved the curing properties of the EPDM compound. The ΔTorque and cross‐link density of modified CB/EPDM show the highest value. Modified CB/Nano‐Silica/EPDM exhibited significant improvement in tear strength. Modified CB/Nano‐silica/EPDM have lower rolling resistance and higher wet grip.

Grafting Polybutadiene onto Surfaces of Talcum Powder by Spray-Drying Technology and Modification of EPDM Rubber

Effect of interfacial sacrificial bonds on the vulcanization and mechanical properties of styrene butadiene rubber/talcum powder composites

Preparation and properties of EPDM/TiO2 composites

Modification of Talc@TiO2 toward high-performance nitrile rubber application

Grafting polyisoprene onto surfaces of kaolin by spray drying technology and modification of styrene–butadiene rubber

Synthesis of Monodisperse Mesoporous Carbon Spheres/EPDM Rubber Composites and Their Enhancement Mechanical Properties

An efficient method to prepare high grafting montmorillonite with silane coupling agent and its improvements for styrene butadiene rubber composites

Surface modification of talc powder by silane functionalized polycarboxylates and its effect on the performance of polyvinyl chloride composite

Properties of EPDM Nanocomposites Reinforced with Modified Montmorillonite

Preparation and Characterization of EPDM Composite Crosslinked with Titanium Dioxide

Deproteinized Natural Rubber‐graft‐polyacrylamide‐graft‐polystyrene (dpnr‐g‐pam‐g‐pst): Preparation and Performance Study of a New Water Swellable Rubber

Effect of Dopamine Modified Talcum Powder on the Crystallization Behavior and Rheological Properties of PLA/PBS Blends

Preparation of High-Performance Composite Hydrogel Reinforced by Hydrophilic Modified Waste Rubber Powder

Synthesis of EPDM-g-PMMA through atom transfer radical polymerization

Spray drying preparation of polymethyl methacrylate-grafted natural rubber composite powders and its impact reinforcement effect

Comparison of ethylene-propylene diene terpolymer composites filled with natural and synthesized micas

Silica Modified by Using Alcohol Polyoxyethylene 2 Ether and Silane Coupling Agent together to Achieve 3 High Performance Rubber Composites Using Latex 4 Compounding Method 5

The effect of silane‐modified carbon black and nano‐silica, individually and in combination, on the performance of ethylene–propylene–diene monomer rubber

Performance Improvement of Alumina/silicone Rubber Composites by Adding 3‐(trimethoxysilyl)propyl Methacrylate Grafted Siloxane Copolymer

Promoted Dispersion Of Silica And Interfacial Strength In Rubber/Silica Composites By Grafting With Oniums

Rubber Rail Pad Reinforced by Modified Silica Using GPTMS and Sulfenamide Accelerator