Abstract:The application of waste tire rubber in the concrete industry is one of the most effective and environmentally friendly ways to solve the problem of so-called black pollution. However, the application of rubber particles (RP) in the concrete industry is hindered by their low stiffness and poor bonding performance with the cement matrix. In this paper, a novel modification method of polydopamine (PDA) modification was used to enhance the hydrophilicity of the RP surface. The surface morphology, element content, and hydrophilicity of RP treated with PDA and KMnO4 were analyzed through scanning electron microscope and energy dispersive spectrometer (SEM-EDS) and sedimentation methods. The unit weight, ultrasonic pulse velocity (UPV), compressive strength, compressive toughness, toughness index, and flexural strength were taken to determine the mechanical properties of ultrahigh-performance rubber concrete (RUHPC). The results showed that the adhesion between paste and RP and the sedimentation rate of RP with PDA or KMnO4 treatment methods exhibited a remarkable improvement. Compared with unmodified RUHPC, the basic mechanical properties of KMnO4-modified RUHPC were improved slightly, and its toughness index was improved greatly. SEM and EDS results confirmed that PDA was deposited on the surface of RP, eliminating the gap of interface transition zone and significantly enhancing UPV, compressive strength, and flexural strength of RUHPC by 4.1%–5.8%, 17%–20%, and 6.1%–9.8%, respectively. In addition, the compressive toughness of unmodified and KMnO4-modified RUHPC decreased, whereas that of PDA-modified RUHPC increased significantly. It can be concluded that the mechanical properties of RUHPC with treated RP have improved significantly and the application of RP in ultrahigh-performance composites (UHPC) offers more opportunities for recycling RP.

Preparation of High-Performance Composite Hydrogel Reinforced by Hydrophilic Modified Waste Rubber Powder

Modification of Unsaturated Polyester Resin by HTPB: Effect of Introducing Method of the Rubber

High-value recycling of waste tire rubber powder by wet mixing method

Enhancing Interface Adhesion Between Waterjet‐produced Rubber Powders and Natural Rubber by Wet‐mixing Method

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

Effect of low-cost mussel-inspired poly(catechol/polyamine) modification of waste brick powder followed by grafting of epoxy elastomers on natural rubber composites

Study of the Effect of Surface-Modified Rubber Particles on the Properties of UHPC Containing Polyoxymethylene Fibers

A Novel Grafting‐modified Waste Rubber Powder As Filler in Natural Rubber Vulcanizates

Deproteinized Natural Rubber‐graft‐polyacrylamide‐graft‐polystyrene (dpnr‐g‐pam‐g‐pst): Preparation and Performance Study of a New Water Swellable Rubber

Dynamic Reaction Involving Surface Modified Waste Ground Rubber Tire Powder/Polypropylene

Preparation and mechanical properties of water‐dispersible hyperbranched polymer grafted carbon black/natural rubber composites by latex blending method

Simple Preparation of a Waterborne Polyurethane Crosslinked Hydrogel Adhesive With Satisfactory Mechanical Properties and Adhesion Properties

"Preparation and Water-Swelling Properties of Grafted Natural Rubber Based Water-Swellable Rubber"

Study of the preparation and properties of hydrophobic and high strength geopolymers

Modified Waste Rubber Powders Filled Styrene Butadiene Rubber Toward the Combination of High Elasticity and Low Mechanical Hysteresis

Mechano-chemical rubber reclamation using aminolysis products of waste flexible polyurethane foams as the devulcanizing agent

Improving interface performance between the fibers and rubber using metal cations synergistic polydopamine to modify carbon fibers

A Facile Way to Modify Polyester Fabric to Enhance the Adhesion Behavior to Rubber

Preparation of Hydrophilic Encapsulated Carbon Nanotubes with Polymer Brushes and Its Application in Composite Hydrogels.

Preparation and property characterizations of functional rubber aerogels from recycled waste tire rubber powder

Effect of silane coupling agent grafted glycidyl methacrylate on hollow microsphere/natural rubber composites