Abstract:Carbide slag, an industrial waste produced by calcium carbide hydrolysis to prepare C2H2 gas, was successfully used as inorganic filler in the production of polyvinyl chloride (PVC)-wood composites. carbide slag had an average diameter of 8.1 m which thermally decomposed at about 450 degrees C, and its main component was Ca(OH)(2). Incorporating carbide slag into PVC-wood composites substantially decreased the flexural, tensile, and impact strength of the composites as a result of the poor interfacial adhesion between carbide slag and PVC matrix, which could be evidently observed from the scanning electron microscopy (SEM) study. To give carbide slag better use, silane coupling agent KH570 were chose to modify carbide slag. The results indicated that adding carbide slag modified by KH570 (MCS) into PVC-wood composites could significantly improve its notched impact strength and flexural modulus. The thermogravimetric analysis (TGA) data showed that with the addition of MCS, composite had better thermal stability. It also turned out that with the addition of MCS, its smoke suppression property and flammability were enhanced effectively. To ensure sufficient properties of PVC-wood composites, the optimal adding content of MCS was 20 phr and it leaded to remarkable performance (its flexural modulus was 3.4 GPa, notched impact strength was 3.87 KJ/m(2), limiting oxygen index value was 41.5% and smoke density ranting was 55.1%), all of which endowed PVC-wood composites better utilization. All the results indicated that the preparation of PVC-wood composites with carbide slag could resolve environmental pollution, reuse carbide slag in different fields, and provide a new method for resource utilization of carbide slag. POLYM. COMPOS., 38:2898-2906, 2017. (c) 2015 Society of Plastics Engineers

Formulation optimization and performance enhancement of polyvinyl chloride-silica micropowder composites with a promising flooring application

Surface Modification of Silica Micro-Powder by Titanate Coupling Agent and Its Utilization in PVC Based Composite

Tailoring the Performance of Polymer Composites Via Altering the Properties of the Intrapore Polymers of MCM-48 Nanocomposites As Fillers

Enhanced Sound Insulation and Mechanical Properties Based on Inorganic Fillers/thermoplastic Elastomer Composites

Contributions of TCA-KTTO-modified Quartz Tailings and CPE Toughener in PVC Composites to Enhance the Mechanical-Thermal Performance

Filling of Iron Ore Tailings into Poly(vinyl Chloride) Based Composites: Surface Modification Effect and Performance Enhancement

Toughening Action in Marble Tailings/pvc Composite Plates: Rheological and Mechanical Properties

A New Insight into Utilization of Red Mud in Poly(vinyl Chloride) Composites Via Surface Modification and Toughening Modulation to Attain Performance Optimization

Preparation of Calcium Carbonate@Methyl Methacrylate Nanoparticles by Seeded-Dispersion Polymerization for High Performance Polyvinyl Chloride Nanocomposites

Preparation of PVC composite with high filling of fly ash

PPTA-oligomer Functionalized Multiwalled Carbon Nanotubes Synthesized by "One-Pot" Method for Reinforcement of Polyvinyl Chloride

Surface modification of talc powder by silane functionalized polycarboxylates and its effect on the performance of polyvinyl chloride composite

High-value utilisation of ceramic waste powder in PVC-based composite and basalt fibre reinforcement effect on its performance

High-value application of inorganic–organic surface modification coal gasification fine slag as alternative for calcium carbonate in poly(vinyl chloride) composites

Effects of surface modification of fumed silica on interfacial structures and mechanical properties of poly(vinyl chloride) composites

Mechanical, flammability, and thermal properties of polyvinyl chloride‐wood composites with carbide slag

Interfacial Structure and Mechanical Properties of Nano-CaCO3/PVC Composites Affected by CPE

Fabrication of Poly(vinylidene Fluoride)‐based Composite Powder Coating with Enhanced Adhesion Performance

Experimental evaluation of bamboo fiber/particulate coconut shell hybrid PVC composite

The Surface Modification of Nanosilica, Preparation of Nanosilica/acrylic Core‐shell Composite Latex, and Its Application in Toughening PVC Matrix

Effects of Inorganic‐organic Surface Modification on the Mechanical and Thermal Properties of Poly(vinyl Chloride) Composites Reinforced with Fly‐ash