Abstract:In order to limit the ever-increasing consumption of new resources for material formulations, regulations and legislation require us to move from a linear to a circular economy and to find efficient ways to recycle, reuse and recover materials. Taking into account the principles of material circularity and waste reuse, this research study aims to produce thermoplastic composites using two types of industrial waste from neighbouring companies, namely waste polypropylene (wPP) from household production and carbon-fibre-reinforced epoxy composite scrap from a pultrusion company. The industrial scrap of the carbon-fibre-reinforced epoxy composites was either machined/ground to powder (pCFRC) and used directly as a reinforcement agent or subjected to a chemical digestion process to recover the carbon fibres (rCFs). Both pCFRC and rCF, at different weight ratios, were melt-blended with wPP. Prior to melt blending, both pCFRC and rCF were analysed for morphology by scanning electron microscopy (SEM). The pCFRC powder contains epoxy resin fragments with spherical to ellipsoidal shape and carbon fibre fragments. The rCFs are clean from the matrix, but they are slightly thicker and corrugated after the matrix digestion. Further, the morphologies of wPP/pCFRC and wPP/rCF were also investigated by SEM, while the thermal behaviour, i.e., transitions and changes in crystallinity, and thermal resistance were evaluated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. The strength of the interaction between the filler (i.e., pCFRC or rCF) and the wPP matrix and the processability of these composites were assessed by rheological studies. Finally, the mechanical properties of the systems were characterised by tensile tests, and as found, both pCFRC and rCF exert reinforcement effects, although better results were obtained using rCF. The wPP/pCFRC results are more heterogeneous than those of the wPP/rCF due to the presence of epoxy and carbon fibre fragments, and this heterogeneity could be considered responsible for the mechanical behaviour. Further, the presence of both pCFRC and rCF leads to a restriction of polymer chain mobility, which leads to an overall reduction in ductility. All the results obtained suggest that both pCFRC and rCF are good candidates as reinforcing fillers for wPP and that these complex systems could potentially be processed by injection or compression moulding.

High-value utilisation of ceramic waste powder in PVC-based composite and basalt fibre reinforcement effect on its performance

Fabrication and properties of polypylene matrix composites reinforced by ultrafine bamboo-char

Impact of Chemical Modification of Bamboo Fibers on Properties of Fiber Reinforced PVC Composites

High-Intensity Ultrasonication Modification of Vapor Grown Carbon Fibers with Poly(Vinyl Alcohol) for the Preparation of High Strength Composites by Simple Water Casting

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

The Study of Modification of PVC-materials by Rice Husk Ash Including Activated by Cationic Surfactant and Wollastonite on Its Basis

A Study of Plant-Filled Polymer Composites Based on Highly Plasticized Polyvinyl Chloride

Formulation optimization and performance enhancement of polyvinyl chloride-silica micropowder composites with a promising flooring application

High-value application of inorganic–organic surface modification coal gasification fine slag as alternative for calcium carbonate in poly(vinyl chloride) composites

Ultra-strong and environmentally friendly waste polyvinyl chloride/paper biocomposites

Synergistic reinforcing effect of fly ash and powdered wood chips on the properties of polypropylene hybrid composites

Effect of solid waste ceramic on uniaxial tensile properties and thin plate bending properties of polyvinyl alcohol engineered cementitious composite

Multiscale Carbon Fibre–Carbon Nanotube Composites of Poly(Vinyl Chloride)—An Evaluation of Their Properties and Structure

Investigation of polymer injection molding using calcareous waste concrete powder and polyethylene

Experimental evaluation of bamboo fiber/particulate coconut shell hybrid PVC composite

Preparation of Hierarchical CaSO4 Whisker and Its Reinforcing Effect on PVC Composites

Sustainable Composites from Waste Polypropylene Added with Thermoset Composite Waste or Recovered Carbon Fibres

Preparation of PVC composite with high filling of fly ash

The Reinforcing Effect of Waste Corrugated Paper Fiber on Polylactic Acid

Enhanced recyclability of waste plastics for waterproof cementitious composites with polymer-nanosilica hybrids

The Reinforcing Effect of Waste Polyester Fiber on Recycled Polyethylene