Abstract:Recent advances in the field of composite materials, aligning them with cost-effectiveness and environmental sustainability, have made the development of materials from industrial waste an attractive area of research. This work introduces an innovative approach for the reuse of globally available industrial waste by hybridizing organic and inorganic by-products to create low-cost composite materials with synergistically enhanced performances. Herein, industrial wastes, namely powdered wood chips (PWC) from the woodworking industry and fly ash (FA) derived from bagasse burning, were incorporated in a thermoplastic polypropylene (PP). Hybrid PP/PWC/FA composites at 70/20/10, 70/15/15 and 70/10/20 wt% were manufactured via extrusion process, followed by injection molding. Micrographic observations and infrared spectroscopy reveal that PWC particles have good physical adherence with PP. In contrast, the hydrophilic nature of FA leads to the creation of gaps at the interface due to the poor interfacial adhesion. The latter difference is reflected in the combined void nucleation modes of particle–fracture and particles–matrix interface decohesion during hybrid composites' tensile deformation. This provides a good synergistic stiffening effect for 70/20/10 wt% PP/PWC/FA hybrid composite, which offers the highest Young's modulus improvement of about 44.43%, while benefiting from balanced tensile strength and strain at yield. Furthermore, a two-way ANOVA at a significance level of 5% also proved the significant effect of PWC and FA reinforcement on the tensile parameters, as the p -values were below 0.05. Melt rheological properties demonstrate complex viscosity decrement for hybrid composites, suggesting a reduction in the energy required during production. Overall, the novel, high-performance hybrid composites developed can be manufactured with less energy consumption and are suitable for applications requiring high-temperature resistance and stiffness such as automotive, construction, and beyond.

Preparation of PVC composite with high filling of fly ash

Impact Response of Bamboo-Plastic Composites with the Properties of Bamboo and Polyvinylchloride (PVC)

Impact of Chemical Modification of Bamboo Fibers on Properties of Fiber Reinforced PVC Composites

Tailoring the Performance of Polymer Composites Via Altering the Properties of the Intrapore Polymers of MCM-48 Nanocomposites As Fillers

High-Intensity Ultrasonication Modification of Vapor Grown Carbon Fibers with Poly(Vinyl Alcohol) for the Preparation of High Strength Composites by Simple Water Casting

Preparation of PVC/CaCO3 Nano-Filler Composite Special for Building Material by In-Situ Polymerization

Synthesis of ACR/nanometer SiO2 Composite Particles and Their Tonghening Effect on PVC

Preparation And Characterization Of Poly(Vinyl Chloride)/Layered Double Hydroxides Nanocomposite Via In Situ Suspension Polymerization

Preparation and characterization of poly(vinyl chloride)/layered double hydroxides nanocomposite viain situ suspension polymerization

Formulation optimization and performance enhancement of polyvinyl chloride-silica micropowder composites with a promising flooring application

Preparation and mechanism of fly ash based composite fillers with different morphologies and its application in filling polyamide 6

High-value utilisation of ceramic waste powder in PVC-based composite and basalt fibre reinforcement effect on its performance

Preparation and Properties of in Situ Polymerization of Poly (vinyl Chloride)

Preparation of Waste PP/Fly Ash/Waste Stone Powder Composites and Evaluation of Their Mechanical Properties

Preparation and properties of PLA/PBAT composites modified with different filler particles

The Study of Modification of PVC-materials by Rice Husk Ash Including Activated by Cationic Surfactant and Wollastonite on Its Basis

Synergistic reinforcing effect of fly ash and powdered wood chips on the properties of polypropylene hybrid composites

Transforming fly ash into value: Sustainable LLDPE-fly ash composites via rotational molding

Effect of Spherical Silica on the Molding and Properties of Cellulose/Plastic Composite with High Cellulose Content

Improvement of the dispersity of micro‐nano particles for PP/PVC composites using gas‐assisted dispersion in a controlled foaming process

Preparation of Antimony-Doped Tin Oxide Fly Ash Antistatic Composite and Its Properties in Filling EVA