Abstract:We propose a hollow-core fiber (HCF) end-cap that incorporates a short segment of a single-mode fiber (SMF) that serves as a modal filter. To adapt the end-cap input and output beam to the desired size, the SMF was fusion spliced with short segments of mode-field adapting graded index (GRIN) fibers on both sides. The end-cap is anti-reflective coated to minimize insertion loss and parasitic reflections. The presented proof-of-concept experiments show its ability to suppress coupling into HCFs' higher-order modes. For example, without any end-cap, the extinction ratio between the LP$_{11}$ and the fundamental mode was found to be as low as 9 dB when coupling light from a free-space beam that was misaligned by as little as 1.1$^{\circ }$. This was improved to 23 dB when inserting the developed end-cap. Such small angle misalignment often exists when aligning the input beam with 3-axis (x,y,z) stages only (rather than 5-axis that also include pitch and yaw). Finally, we glued the end-cap with the HCF, providing hermetic sealing to the HCF input/output. This is of interest for stable operation in applications that use free-space light launch or require HCF output into free space.

Experimental research of end-cap splicing technique for double-cladfibers based on CO2 laser

Experimental Research of End-Cap Splicing Technique for Double-Clad Fibers Based on CO_2 Laser

Filament Fusion of Hollow-Core Photonic Crystal Fiber and Single Mode Fiber: Numerical Simulation and Experimental Analysis

Fusion Splicing of Double-Clad Specialty Fiber Using Active Alignment Technology

Fused Side-Coupler for Double-Clad Fiber Lasers

Fused side-coupler for double-clad fiber lasers with CO_2 laser

Study on design of high-power fiber fused components

A Non-Fused Fiber Coupler for Side-Pumping of Double-Clad Fiber Lasers

End-capping Hollow-core Fibers with Suppressed Coupling into Higher-order Modes

Efficiency and Beam Quality Deterioration in Double-Cladding Fiber Amplifiers Induced by Core Misalignment of Fusion Splices

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

Low Loss Splicing Experiment of High Nonlinearity Photonic Crystal Fiber and Single Mode Fiber

Side Pumping of Double Clad Fiber Laser with a Nonfusional Fiber Coupler

Fused taper technique for fiber coupling applications

End-pump silica-fluoride fiber combiner utilizing tapering and assembling technique for mid-infrared laser systems

10.6 Kw High-Brightness Cascade-End-pumped Monolithic Fiber Lasers Directly Pumped by Laser Diodes in Step-Index Large Mode Area Double Cladding Fiber

Fusion Splicing Soft Glass Microfibers for Photonic Devices

Low-loss Splicing Small-Core Photonic Crystal Fibers and Single-Mode Fibers by Repeated Arc Discharges

Double-end low-loss coupling of anti-resonant hollow-core fibers with solid-core single-mode fibers by tapering technique

Fusion Splicing Photonic Crystal Fibers and Conventional Single-Mode Fibers: Microhole Collapse Effect

Influence of fusion splice on high power ytterbium-doped fiber laser with master oscillator multi-stage power amplifiers structure