Abstract:The use of array generators has become ubiquitous in various applications such as laser fabrication, face identification, and motion sensing. The Dammann grating, a diffractive optical element, is the mainstream approach for generating uniform spot arrays. However, its limited capability and the contradiction between the performance and the complexity of fabrication hinder its application. To address this issue, an all-in-one collimating splitter based on metasurfaces is theoretically proposed by synthesizing the phase of an inverse-optimized Dammann grating and a collimating lens. Leveraging both the diffraction effect of Dammann grating and the Fourier transformation of the collimating lens, the number of spot arrays can be largely increased with a single lenslet. The proposed design shows a large field of view of 62° × 62° and a high uniformity of 1.29% in generating a spot array of 3 × 3 on a single-fiber platform, confirmed by both the scalar and full-wave simulation. Further, a larger spot array up to 15 × 15 is also derived in the far field by integrating the proposed metasurface on a 5 × 5 fiber array platform, confirmed by the scalar simulation. Our design may be transplanted to the vertical-cavity surface-emitting laser platform, and shows great potential in various applications including face identification and motion sensing.

Monolithic linear array fiber end cap for spectral beam combination

Splicing Optical Microfibers Via Polymer Nanowires

Artificial Compound Eye-Tipped Optical Fiber for Wide Field Illumination.

Subwavelength Focusing by a Micro/nanofiber Array.

High power mid-infrared side-pump combiner with good thermal stability based on the point-by-point fusion splicing technique

High performance DFB laser array combiner enabled by all-dielectric metalens array

End-capping Hollow-core Fibers with Suppressed Coupling into Higher-order Modes

Fusion Splicing of Silica Hollow Core Anti-Resonant Fibers With Polarization Maintaining Fibers

Fusion Splicing of Double-Clad Specialty Fiber Using Active Alignment Technology

Efficient fiber coupling system for simultaneous beam shaping and wavelength combining based on misaligned stepped prism multiplexing

End-pump silica-fluoride fiber combiner utilizing tapering and assembling technique for mid-infrared laser systems

Experimental research of end-cap splicing technique for double-cladfibers based on CO2 laser

Fusion Splicing Soft Glass Microfibers for Photonic Devices

High power ring spot adjustable fiber combiner based on (6 + 3) × 1 structure

Polarization-separated feedback spectral beam combining source

Splicing Hollow-Core Fiber with Standard Glass-Core Fiber with Ultralow Back-Reflection and Low Coupling Loss

Low-loss fusion splicing between spacing-mismatched multicore fibers

Ultracompact metalens-based beam-focusing fiber-optic device with a large numerical aperture

Experimental Research of End-Cap Splicing Technique for Double-Clad Fibers Based on CO_2 Laser

Fiber Optic Coupling of High Power Laser Diode Array

All-in-One Collimating Splitter Based on a Meta-Fiber Platform