Abstract:We demonstrate 40 Gb/s all-optical clock recovery by using a monolithic integrated amplified-feedback laser (AFL) with coherent injection-locked method. The AFL consists of a gain-coupled DFB laser and an optical amplified feedback external cavity. With proper design and operation of AFL, the device can work at self-pulsation state that resulted from the beating between two lasing modes. The self-pulsation can be injection-locked to the optical clock embedded in input data streams. Due to different work mechanisms, there are two all-optical clock recovery operation modes: incoherent injection-locked and coherent injection-locked. It's predicted that the coherent injection method has various advantages: 1) requiring low injection power recovery, 2) independent of the bit rate and 3) introducing little timing jitter to the recovered clock. The robustness of coherent clock recovery is confirmed by our experimental results. We set up a return-to-zero (RZ) pseudorandom binary sequence (PRBS) data streams all-optical clock recovery system. This coherent injection-locked based clock recovery method is optical signal noise ratio (OSNR) and chromatic dispersion (CD) degeneration tolerant, and has low timing jitter and high sensitivity.

Single and Multiwavelength All-Optical Clock Recovery Using Fabry-Perot Semiconductor Optical Amplifier

100-GHz wavelength-tunable all-optical clock recovery with Fabry-Perot filter and semiconductor optical amplifier

Multiwavelength All-Optical Clock Recovery of Non-Return-To-Zero Data

100-Ghz All-Optical Clock Recovery with Fabry-Perot Cavity and Semiconductor Optical Amplifier

Short Pulsewidth Clock Recovery at 100 GHz Using Fabry-Perot Cavity and Semiconductor Optical Amplifiers

A Simple Method for Clock Recovery

All-Optical Clock Recovery for 20 Gb/s Using an Amplified Feedback DFB Laser

Wavelength-tunable all-optical clock recovery using a fiber-optic parametric oscillator

All-Optical, Bit-Rate Tunable Clock Recovery For Nrz-Ask Signals

All-Optical Clock Recovery Using Erbium-Doped Fiber Laser Incorporating an Electroabsorption Modulator and A Linear Optical Amplifier

All-Optical Clock Recovery from Non-Return to Zero Data Stream Based on Semiconductor Optical Amplifier and Stimulated Brillouin Scattering

Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

40Gbits/s All-Optical Clock Recovery for Degraded Signals Using an Amplified Feedback Laser

All-optical Clock Recovery Using Parallel Ridge-Width Varied DFB Lasers Integrated with Y-branch Waveguide Coupler

Optical Clock Extraction And Self-Routeing Using A Semiconductor Nonlinear Multilayer Structure

Polarization Insensitive Widely Tunable All-Optical Clock Recovery Based on AM Mode-Locking of a Fiber Ring Laser

All-optical Subharmonic Clock Recovery Using an Injected Mode-locked Fiber Ring Laser

Wavelength Tunable All-Optical Clock Recovery Using a Fiber Parametric Oscillator

A Novel All-Optical Clock Recovery Experiment for Extracting Clock Signal from OTDM Signal

Low-timing-jitter all-optical clock recovery for 40 Gbits/s RZ-DPSK and NRZ-DPSK signals using a passively mode-locked quantum-dot Fabry-Perot semiconductor laser

100 Gb/s All-Optical Clock Recovery Based on a Monolithic Dual-Mode DBR Laser