Abstract:With the advantages of low investment, small footprint, ease of operation management etc., large-scale vertical tanks for crude oil storage have become an obvious trend. However, stress intensity of the tank wall increases with constant enlargement of oil tank's parameters, and the yield strength of the steel used as tank wall material can not be more than 490 MPa. Besides, the maximum thickness of shell plate generally should be not over 45 mm subjected to the restriction of manufacturing process. So, it is important to design the structure of tank, reasonably and reduce the stress as much as possible. This paper combines theoretical analysis and numerical simulation together, analyzing and calculating the stress of shell plate and bottom plate of an ultra-large tank for crude oil storage which is 200000 cubic meters, and comparing the stress level of three design schemes about shell plate and bottom annular plate, then giving a scheme whose stress distribution is more reasonable. The study shows that combined cylindrical shell method is applicable to the theoretical stress calculation of shell plates of ultra-large crude oil storage tanks, finite element method using contact element could simulate the stress distribution of bottom plate well, and give the optimal structure parameter scheme by controlling the hoop stress of tank wall and radial stress of bottom plate. The result of this paper has a certain practical guiding significance to the optimization design of ultra-large tanks for crude oil storage.

FE Analysis of Structural Strength for the Cargo Holds of 12000 DWT Bulk Carrier

Strength Check and Stress Test for Hoisting Mechanism of the 1300t Box-type Derrick Floating Crane

Dynamic Analysis of Pipeline Lifting Operations for Different Current Velocities and Wave Heights

Strength analysis of self-unloading bulk carrier based on LR-SDA

Safety and stability analysis of the ship loader during shipping

Analysis of Wind Load Effect on Ship Loader in Shipping Process

Static and Fatigue Analysis of Quayside Container Crane

ULTIMATE LOAD-CAPACITY ANALYSIS OF LIGHT-WEIGHT STEEL PORTAL FRAMES UNDER WIND AND SNOW LOADING

Load-Carrying Capacity and Practical Calculation Method for Hollow Cylinder Joints Connected with H-Shaped Beams

Analysis of the overall structural strength and optimization recommendations for ultra-large container ships based on the improved equivalent design wave method

Analysis of plated-hull structure strength against hydrostatic and hydrodynamic loads: A case study of 600 TEU container ships

Simulation of impact load on ship-platform collision

Experimental and Numerical Analysis of Supporting Forces and Lashing Forces in a Ship Cargo Securing Scheme

The influence of lateral pressure on ultimate strength of ship structure

Experimental investigation of nonlinear springing and fatigue assessment of a 308,000 DWT oil tanker and a 205,000 DWT bulk carrier in a basin

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

STRENGTH AND STABILITY ANALYSIS OF DOUBLE-DECK FLOATING ROOF UNDER WIND LOAD

Experimental numerical and analytical analysis of the penetration of a scaled double-hull tanker side structure

Comparison of Safety Levels of Ship’s Hull Girders in Longitudinal Bending Designed by Different Criteria

Advanced Analysis of Marine Structures—Edition II

Optimization Analysis On The Structure Parameters Of A 20x10(4)M(3) Ultra-Large Tank For Crude Oil Storage