Abstract:Springing is a resonance phenomenon between the waves and the ship hull, and the high frequency vibration will threaten the safety of hull structures. With the development of economy, the size of ultra large container ships has been increasing, and the resulting springing and whipping response and their effects has been paid more and more attention. The structure of an ultra large container ship is essentially U-shaped with a low shear center, which results in strong coupling between horizontal bending and torsion. On the other hand, the actual response of hull structures will have an apparently dynamic amplification phenomenon under the effect of springing. In this paper, the wave-induced loads on the hull structure is estimated in the framework of the 3D linear hydroelastic theory, which coupling horizontal and torsional vibration. The vibration characteristics are investigated by using finite element method (FEM), which can get a better calculation accuracy than the simplified calculation method such as the Transfer Matrix Method. And the mode shape of displacement and section loads of the whole ship can be obtained and processed, which is needed for the analysis of hydroelasticity. Finally, in order to consider the effect of the dynamic amplification effect, the dynamic response analysis approach is used for the stress calculation. A 21000TEU is calculated by this method, and the difference between wave-induced and springing-induced section load in frequency domain is shown. Then the results of the frequency response analysis is compared with the quasi-static methods. And the effect of the springing and the dynamic magnification is analyzed.

Analysis of the overall structural strength and optimization recommendations for ultra-large container ships based on the improved equivalent design wave method

Numerical Investigation of Three-Dimensional Hull Girder Ultimate Strength Envelope for an Ultra Large Container Ship

Springing loads analysis of large‐scale container ships in regular waves

Hydroelastic Analysis and Model Tests on the Structural Responses and Fatigue Behaviours of an Ultra-Large Ore Carrier in Waves

Experimental and Numerical Investigations of the Ultimate Torsional Strength of an Ultra Large Container Ship

Finite Element Analysis of Ship Structure of 450000DWT Ultra-Large Ore Carrier

Dynamic Analysis of the Structure of a Container Ship

Investigation of Container Ship Structural Dynamic Ultimate Strength Under Combined Bending, Torsion and Lateral Pressure

Optimization Analysis for the Typical Details of Ship Structures

Key Influencing Factors in Ultimate Strength Analysis for Large Container Ships

Whole-ship Structural Optimization under Static and Dynamic Conditions

Research on Strength of Ultra-Large Grab Dredger Subjected to Wave Load in the South China Sea

Nonlinear bending moments of an ultra large container ship in extreme waves based on a segmented model test

The Structural Analysis and Optimum of the Small Water Plane Area Twin Hull Ship

Structure design and strength evaluation of container ship cargo area

Strength Analysis of Overall Ship FEM Model Based on Design Wave Approach

Investigation of Non-Linear Ship Hydroelasticity by CFD-FEM Coupling Method

Hydroelastic Analysis of the Bending-Torsional Coupling Vibrations of an Ultra-Large Container Ship

Numerical Convergence on the Hydroelasticity of a Large Containership

Research on Structural Collapse of a Containership under Combined Bending–Torsion by Oblique Waves

Theoretical and Experimental Study on Nonlinear Hydroelastic Responses and Slamming Loads of Ship Advancing in Regular Waves