Abstract:Stiffened panels are widely used in ship and offshore structures and the evaluation of cutting resistance is important for structural safety assessment in ship collision and grounding accidents. This paper presented numerical and analytical analyses for cutting analysis stiffened plates. The numerical simulations were firstly validated against experimental data and the stiffener effects on the cutting resistance were then studied through numerical simulations by changing the stiffener direction and thickness. The longitudinal stiffener was found to influence the resistance from an earlier stage while a much larger peak value of cutting resistance was reached for transversely stiffened plate. Based on the numerical study and review of previous formulas, a new analytical model was proposed to predict the cutting resistance of stiffened plates. The new method established analytical model for longitudinal and transverse stiffeners respectively to capture their dynamic responses, and the coupling effects from them were considered by dynamically updating the curling radius of plate during cutting process. The newly developed method was validated and verified against existing experimental data and the presented numerical results, and very good agreement was achieved. The newly proposed method was also compared with existing formulas to investigate the adaptivity and it is found that the accuracy is better than previous formulas, which combines with equivalent thickness method, especially when predicting the cutting resistance of transversely stiffened plate. The present study can benefit the structural damage assessment of stiffened decks or bottom plates of ships in real collision and grounding accidents.

Experimental numerical and analytical analysis of the penetration of a scaled double-hull tanker side structure

Experimental and numerical investigation on a double hull structure subject to collision

Mechanical analysis and interior stiffeners arrangement discussion of a specific ship side collision situation

Numerical and Simplified Analytical Methods for Analysis of the Residual Strength of Ship Double Bottom

A new analytical model to evaluate ship side collisions with large indentation considering interaction effects between structural components

Large Deflection Resistance and Fracture of Panels Subjected to the Lateral Penetration

An Analytical Solution for Evaluating Structural Resistance of a Stiffened Plate under Lateral Impact with Large Indentation

Residual Strength of Damaged Stiffened Panel on Double Bottom Ship

Simulation of impact load on ship-platform collision

A Novel Efficient Method to Evaluate the Dynamic Response of Laminated Plates Subjected to Underwater Shock

An Analytical Method for Evaluating the Structural Resistance of Plate Structures under In-Plane Impact Load in Ship-Side Collision Scenarios

Collapse mechanism analysis of stiffeners on transverse floors in a shoal grounding course of double bottom tanker

Experiment Study of Critical Dynamic Loads for Stiffened Panels under Axial Impact

Analysis of structural crashworthiness of double-hull ships in collision and grounding

Numerical Investigation of Three-Dimensional Hull Girder Ultimate Strength Envelope for an Ultra Large Container Ship

Experiment and numerical analysis of crashworthiness of the double-skin side structure on a nuclear power platform

Numerical Study For The Progressive Collapse Of Scale Model For Ulcs Hull Girder Under Longitudinal Bending

Ultimate Residual Strength Prediction of Oil Tanker After Structural Damage by a Side Collision

Numerical investigation on the ultimate strength behaviour and assessment of continuous hull plate under combined biaxial cyclic loads and lateral pressure

Experimental and numerical buckling analysis of cylindrical pressure hulls with multi-circular openings

Numerical and Analytical Study of the Stiffener Effects on the Structural Resistance of a Plate Cut by a Wedge