Abstract:Large waves cause a great number of collapsed-ship accidents, resulting in the loss of many lives and properties. It has been found that most of these collapses are caused by encountering oblique waves. As a result, the ship structure experiences a complex collapse under combined bending and torsion. This paper utilizes a numerical hydroelasto-plastic approach, coupling CFD (Computational Fluid Dynamics) with the nonlinear FEM (Finite-Element Method), to study the structural collapse of a containership in oblique waves. First, a 4600 TEU containership was selected to study its collapse mechanism under oblique waves. Second, a hydroelasto-plastic numerical coupling of CFD and nonlinear FEM is used to co-calculate the wave loads and structural collapse of containership. The hydrodynamic model is constructed and used to solve wave loads in the CFD solver, and a nonlinear FEM model of containership with finer meshes is also modeled to solve the structural collapses, including plasticity and buckling. Third, several oblique-wave cases involving heading angles of 120°, 135°, 150°, and 180° are determined and calculated. Typical cases are discussed for time-domain stress histories and collapsed courses. Finally, the influence of oblique-wave parameters on structural collapse is discussed, and the collapse mechanism of containerships under the action of oblique waves is obtained, which provides a new understanding of ship structure design.
What problem does this paper attempt to address?
The paper primarily investigates the structural collapse of container ships under oblique wave action, aiming to provide new insights for ship structural design. Specifically, when a ship encounters oblique waves, the hull experiences highly asymmetric wave pressure distribution on both sides, resulting in bending and torsional moments. The interaction between these moments leads to structural deformation. The combined effect of bending and torsional moments causes an interaction between longitudinal stress and shear stress, thereby reducing the longitudinal and torsional ultimate strength. When a container ship encounters large oblique waves, it may suffer structural collapse due to plasticity and buckling, ultimately leading to ship fracture accidents.
To address this issue, the paper proposes two key points:
1. Introducing the Fluid-Structure Interaction (FSI) method to study the impact of oblique waves on ship structural collapse. Traditionally, the collapse of ships under bending and torsion is studied solely through structural mechanics, applying assumed constant bending and torsional moments to the ship model to obtain structural response. However, in reality, the dynamic variation between bending and torsional moments is a strongly nonlinear fluid-structure coupling problem that requires consideration of the strong interaction between wave loads and structural nonlinearity. Therefore, using the FSI method to study the collapse of ship structures under oblique wave action becomes crucial.
2. It is anticipated that a viscous flow fluid-structure plasticity coupling will be adopted, combining Computational Fluid Dynamics (CFD) and nonlinear Finite Element Method (FEM), to handle the three-dimensional asymmetric collapse of ship structures in large oblique waves. Considering the asymmetric collapse of ship structures, the use of three-dimensional fluid dynamics and structural dynamics is particularly important. CFD utilizes a three-dimensional full-domain model to simulate fluid nonlinearity, such as slamming, green water, splashing, and free surface breaking. Nonlinear FEM is used to address the nonlinear stiffness issues during ship structural collapse, capable of calculating structural nonlinearity related to plasticity and buckling. It is expected that a bidirectional FSI scheme will be used to simulate the collapse of ship structures under oblique waves, which can yield the anticipated results.
The innovation of the paper lies in the use of bidirectional FSI combined with CFD and nonlinear FEM to study the structural collapse of a full-scale container ship under the interactive combination of bending and torsional moments caused by oblique waves. A full-scale container ship with a capacity of 4600 TEU was selected as the research subject, and the numerical fluid-structure plasticity method coupling CFD and nonlinear FEM was used to simultaneously calculate wave loads and structural collapse. A CFD fluid dynamics model was developed to solve the three-dimensional asymmetric wave pressure on the ship's hull in oblique waves, and a container ship FEM model with a fine mesh was constructed to address the structural collapse issue. Several oblique wave cases were determined and calculated, including heading angles of 120°, 135°, 150°, and 180°. The time-domain stress history of typical cases was discussed, with particular focus on the collapse process of the container ship. Finally, the influence of oblique wave parameters on structural collapse was explored, and the collapse mechanism of container ships in oblique waves was analyzed, providing new ideas for ship structural design.