Abstract:With the development of ships in recent years, the ship size becomes larger and the hull structure becomes complicated. The entire ship should be modeled to study the dynamic responses as the key equipment may be located away from the loading area, leading to a dramatic increase in the number of numerical model elements. The stiffener, which is attached to the hull plate, may further make the numerical simulation time-consuming even difficult to converge and stabilize. Thus, it is necessary to reduce the element number of stiffened plates in the ship model. Current approaches may only consider the single in-plane or out-of-plane stiffness equivalence to smear the stiffener onto the plating. Besides, the applicability may be limited to the one-way stiffened plate. In this study, a simplified approach considered the coupling effect of in-plane and out-of-plane stiffnesses for two-way stiffened plate is proposed. Firstly, the equilibrium and compatibility equations are used to equal the stiffness of stiffened plate to the single plate with orthotropic material properties. Then the coupled load-deformation relationship of the equivalent single plate is derived based on the orthotropic material parameters and first-order shear deformation theory. Based on the mechanical property equivalence, the transverse stiffener and the longitudinal stringer of numerical ship model can be removed. Subsequently, the simplification of stiffener can amplify the maximum mesh size from stiffener spacing to web frame spacing, which can further reduce the number of elements. The fine mesh can be used for the loading and focus regions of the model, while the coarse mesh can be used for the rest region. Finally, the various dynamic evaluations are conducted to discuss the applicability of the approach. The results show that the equivalent single plate combined with the gradient mesh method can improve the computational efficiency and stability with high accuracy.

A Numerical Investigation on Collapse Modes of Stiffened Plates under Combined Dynamic Loads

An Experimental Investigation on the Collapse Modes of Stiffened Plates Subjected to Combined Axial and Lateral Loads

A Study on the Lateral Ultimate Strength and Collapse Modes of Doubly Curved Stiffened Plates

Progressive Collapse Response and Ultimate Strength Evaluation of Stiffened Plates with Welding Residual Stress under Combined Biaxial Cyclic Loads and Lateral Pressure

Dynamic Ultimate Strength of Outer Bottom Stiffened Plates under In-Plane Compression and Lateral Pressure

Experimental and Numerical Study on the Ultimate Strength of Stiffened Plates Subjected to Combined Biaxial Compression and Lateral Loads

Lateral pressure effect on the ultimate strength of the stiffened plate subjected to combined loads

Numerical investigation on the ultimate strength behaviour and assessment of continuous hull plate under combined biaxial cyclic loads and lateral pressure

Progressive collapse analysis and ultimate strength estimation of continuous stiffened panel under longitudinal extreme cyclic load and lateral pressure

An Analytical Solution for Evaluating Structural Resistance of a Stiffened Plate under Lateral Impact with Large Indentation

Collapse mechanism analysis of stiffeners on transverse floors in a shoal grounding course of double bottom tanker

A simplified modeling and analysis approach for nonlinear transient dynamic evaluation of ship hull with single plate equivalence

Mechanical analysis and interior stiffeners arrangement discussion of a specific ship side collision situation

Numerical and Experimental Investigation on Nonlinear Cyclic Collapse Response of Ship Model in Regular Waves

Experiment Study of Critical Dynamic Loads for Stiffened Panels under Axial Impact

Dynamic response of stiffened plate under internal blast: Experimental and numerical investigation

Influence of the Lateral Pressure on the Collapse Strength of Continuous Stiffened Panels under In-Plane Compression

Research development of buckling and ultimate strength of hull plate and stiffened panel

Dimensional and similitude analysis of stiffened panels under longitudinal compression considering buckling behaviours

A Gradient Mesh Analysis of Numerical Ship Model with Two-Way Stiffened Plate Equivalence

An experimental and numerical investigation on ultimate strength of stiffened plates with opening and perforation corrosion