Abstract:The ultimate strength is an important property for hull structures nowadays. For large-scale structures, scale models are needed to perform physical model tests. Therefore, similarity methods are especially important. Traditional similarity methods consider similarity criteria of cross-section properties, and modern similarity methods introduce some strength-related similarity criteria to consider the nonlinear collapse procedure. However, these two kinds of criteria may be conflicting and are hard to meet simultaneously. Most existing works concentrated on simple structures, like stiffened plates, due to the difficulty in meeting all the similarity criteria. In this paper, a new similarity method is proposed for box girders subjected to the combined load of bending moment and lateral pressure. The proposed method considers only the strength-related similarity criteria, ignoring the criteria of cross-section properties. The column slenderness, the plate slenderness, and the torsional slenderness are selected as the similarity parameters for every stiffened plate in the box girder. The new similarity relations of the ultimate moment and the applied lateral pressure are derived according to the proposed criteria. A structured step-by-step scale model design procedure is proposed to design corresponding scale models. 4 numerical examples are presented to show the correctness and advantages of the proposed method.

Comparison of Safety Levels of Ship’s Hull Girders in Longitudinal Bending Designed by Different Criteria

Safety and stability analysis of the ship loader during shipping

Experimental and numerical investigations on the collapse behaviour of box type hull girder subjected to cyclic ultimate bending moment

Consequences of the Improved Wave Statistics on a Hull Girder Reliability of Double Hull Oil Tankers

Ultimate strength assessment of ship hull structures subjected to cyclic bending moments

Experimental and numerical investigation on the ultimate strength of a ship hull girder model with deck openings

Ultimate strength assessment of hull girders considering elastic shakedown based on Smith's method

A Two-Step Approach for Evaluating the Dynamic Ultimate Load Capacity of Ship Structures

Analysis of the overall structural strength and optimization recommendations for ultra-large container ships based on the improved equivalent design wave method

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

The influence of lateral pressure on ultimate strength of ship structure

Effects of design and fabrication of segmented ship models on test results of wave-induced loads

Numerical investigation on the ultimate strength behaviour and assessment of continuous hull plate under combined biaxial cyclic loads and lateral pressure

Nonlinear bending moments of an ultra large container ship in extreme waves based on a segmented model test

Progressive collapse analysis and ultimate strength estimation of continuous stiffened panel under longitudinal extreme cyclic load and lateral pressure

Analysis of structural crashworthiness of double-hull ships in collision and grounding

Experimental investigation of nonlinear springing and fatigue assessment of a 308,000 DWT oil tanker and a 205,000 DWT bulk carrier in a basin

Ultimate Longitudinal Strength of Composite Ship Hulls

A comparative method for scaling SOLAS collision damage distributions based on ship crashworthiness – application to probabilistic damage stability analysis of a passenger ship

A new similarity method for the ultimate strength of box girders subjected to the combined load of bending and lateral pressure

Advanced empirical formulae for the ultimate strength assessment of continuous hull plate under combined biaxial compression and lateral pressure