Abstract:In this contribution, the thermal behavior and elemental analysis of a series of transparent conductive layer based on pure and Al doped ZnO nanofiber samples produced by the electrospinning method was studied. The nanofibers are spun from a PVA based solution where we added zinc acetate and doped by 1, 2, 3, and 4 wt% aluminum acetate. First, we carried out a qualitative study of nanofibers electro-spun on a glass substrate before and after annealing by scanning electronic microscopy (SEM). For all samples, these images show the quality of the deposited nanofibers and the good crystallization for the ZnO one after annealing. The decomposition of ZnO-Al (AZO) fibers after annealing is noticed and discussed justifying the quantitative analysis made in the rest of this work using the coupled techniques of Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) performed under air atmosphere. We observe changes in the mass loss process with temperature between the various samples, explained by the role of each compound, i.e. PVA, Zn and Al. This study particularly shows the influence of zinc and aluminum doping in the production of nanofibers by electrospinning for high-performance transparent conductive layers. To validate the results obtained by thermal analysis, complementary study of elemental composition by fluorescent X-ray (XRF) was performed to check the initial composition of the fibers before any heat treatment. Finally, results obtained by inductively coupled plasma spectroscopy show that as soon as Al is added to the initial solution, the elements precipitate out due to the neutral pH of this solution. Consequently, new prospects for the deposition of Al-doped ZnO nanofibers by electrospinning can be envisaged by modifying the acidity of the initial solutions.

Morphological Control of Centimeter Long Aluminum-Doped Zinc Oxide Nanofibers Prepared by Electrospinning

Effects of electrostatic polarities on the morphology of electrospun oxide nanofibers: A case study on alumina-based nanofibers

Oriented Nanofibers by a Newly Modified Electrospinning Method

Luminescent Properties of Aluminum Doped Zinc Oxide Nanofibers Prepared by Electrospinning

Morphology Control Of Nanohelix By Electrospinning

Specific role of Al in the synthesis of electrospun Al:ZnO nanofibers: Thermal and elemental analysis

Morphology and deformation state of nanofibers in anodic aluminum oxide (AAO) templates

Preparation and Properties of Poly (vinyl Alcohol) Nanofibers by Electrospinning

Sol–gel-hydrothermal Synthesis and Conductive Properties of Al-doped ZnO Nanopowders with Controllable Morphology

Preparation of Mg Xzn1-Xo Nanofibers Using PVP Nanofibers As Templates by Atom Layer Deposition and Their Optical Properties

Preparation and Characterization of ZrO2 Nanofibers and Nanobelts by Electrospinning

Control of the Porous Surface Morphology of Polyoxymethylene Electrospun Fibers

Tailoring the Morphologies of Pvdf Nanofibers by Interfacial Diffusion During Coaxial Electrospinning

Study on Aluminum Concentration on Optical and Electrical Properties of AZO Thin Films Fabricated by Ultrasonic Spray Pyrolysis

Morphological Modulation of Electrospun PVDF/PVP Nanofibers

The Growth and Photocatalytic Property of ZnO Nanofibers Synthesized by Atom Layer Deposition Using PVP Nanofibers As Templates

Control of diameter and morphology of poly(vinylidene fluoride) nanofibers fabricated by electrospinning

Experimental Investigation of the Effect of Processing Parameters on the Formation of Electrospun Polyethylene Oxide Nanofibers

Morphology and orientation controlling of ZnO nanofibers via chemical bath deposition

Effects Of Solution Properties On The Morphology And Diameters Of Nanofibers Fabricated By Electrospinning