Abstract:Single-phase Li0.5-0.5xZnxFe2.5-0.5xO4 (where x=0.0, 0.2, 0.3, 0.4, 0.5 and 0.8) nanofibers with diameters of 50 similar to 100 nm were successfully fabricated via electrospinning technique in combination with subsequent heat treatment using polyvinylpyrrolidone, nickel nitrate, zinc nitrate and ferric nitrate as principal raw material. The thermal decomposition process of as-spun precursor nanofibers and the influences of the calcination temperature and chemical composition on the crystal structure, micromorphology and magnetic properties of the prepared nanofiber samples were investigated by means of thermogravimetric and differential thermal analysis, X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy and vibrating sample magnetometer. The results indicate that the pure crystalline LiZn ferrite nanofibers are basically formed when the precursor nanofibers are calcined at 350 degrees C for 2 h. As the calcination temperature increases from 350 to 600 degrees C, the average grain size of Li0.35Zn0.3Fe2.35O4 nanofibers ranges from 13.0 to 47.5 nm and the micromorphology evolves toward a chain-like structrue. The saturation magnetization of the samples monotonously increases from 39.7 to 84.5 A.m(2).kg(-1), while the coercivity increases initially, reaches a maximun value of 12.6 kA.m(-1) at 550 C and then decreases, which reveals that the magnetic single-domain critical size of Li0.35Zn0.3Fe2.35O4 nanofibers may be around 35 nm. The lattice constant of as-prepared Li0.5-0.5xZnxFe2.5-0.5xO4 nanofibers calcined at 500 degrees C for 2 h exhibits an almost linear increase with increasing x and complies with Vegard's law. The coercivity of these nanofiber samples gradually decreases from 17.1 kA.m(-1) for x=0.0 to 2.4 kA.m(-1) for x=0.8, and the saturation magnetization firstly increases to 74.7 A.m(2).kg(-1) with the value of x up to 0.3 and then decreases beyond this limit. Compared to the nanoparticle counterparts prepared under similar conditions, the LiZn ferrite nanofibers have a relatively high coercivity due to their large shape anisotropy. These LiZn ferrite nanofibers have potential application in many fields such as nanoelectronic devices, sensitive devices, microwave absorbers, and biomedicine.

Preparation of Eu, Li co-doped ZnO red fluorescence nanofibers by electrospinning and their characterization

Fabrication and optical properties of Y2O3: Eu3+ nanofibers prepared by electrospinning.

ELECTROSPINNING PREPARATION AND LUMINESCENE PROPERTIES OF CaTiO3: RE (Eu3+/Gd3+) NANOFIBERS

Luminescent Properties of Aluminum Doped Zinc Oxide Nanofibers Prepared by Electrospinning

Preparation and Characterization of Mn DopedZnO Nanofibers

Ferromagnetic Fe3O4 Nanofibers: Electrospinning Synthesis and Characterization

Preparation and characterization of rare-earth strontium aluminate luminescent nanofibers by electrospinning

LaMnO3 and La0.875Sr0.125MnO3 Nanofibers via Electrospinning

White-light Emission and Weak Antiferromagnetism from Cubic Rare-Earth Oxide Eu2O3 Electrospun Nanostructures

Exciton quenching and ferromagnetism-to-ferrimagnetism crossover in diluted magnetic semiconducting Zn1-xCoxO nanogranular nanofibers

Preparation of ZnS Nanofibers Via Electrospinning

Preparation of Zinc Oxide Nanofibers by Electrospinning

Electrospinning Preparation, Structural and Magnetic Properties of Li0.5-0.5xznxfe2.5-0.5xo4 Nanofibers

Preparation, photoluminescence and photocatalytic properties of ZnO:Eu3+ nanocrystals

Oxygen sensitive electrospun nanofibers doped with rare earth complexes: Characterization and performance

Nanostructured LiCoO2 and LiMn2O4 fibers fabricated by a high frequency electrospinning

LaMnO_3 and La_(0.875)Sr_(0.125)MnO_3 Nanofibers via Electrospinning

Preparation of YIG Single Crystal Nanofibers Via an Electrospinning Technique

Structural and photoluminescent analysis of novel Eu3+ and Dy3+ Co-doped ZnO nanoparticles by incorporation of Li+ and K+ ions

Preparation and Optical Properties of Red, Green and Blue Afterglow Electrospun Nanofibers

Electrospinning preparation and photophysical properties of one-dimensional (1D) composite nanofibers doped with erbium(III) complexes