Abstract:Tensile properties are important use performances of materials. In the present paper. the tensile properties, such as elastic modulus (E-c) and yield strength of glass bead-filled polypropylene (PP) composites were measured by using an Instron material tester at room temperature and varied tensile rates, to identify the effects of tensile rates and filler concentration on these tensile properties. The fillers were A-glass heads. and the surface was pretreated with silane coupling agent. The fillers and PP with different proportion were compounded in a twin-screw extruder in temperature range of 160-230degreesC to produce the composites. The results showed that the E-c increased nonlinearly with increasing the filler content at lower tensile rates, while it did not vary practically with the filler concentration at the highest tensile rate. When the Her content was a constant, E,. was approximately an exponential function of tensile strain rates, except for individual data points. The tensile yield stress (sigma(yc)) decreased nonlinearly with the addition of the filler volume fraction (phi(f)) at lower tensile rates, while it decreased almost linearly with the increase of phi(f) at highest tensile rate. Similarly, sigma(yc) increased with increasing tensile strain rates as a form of index function. Furthermore, for these composites the relationship among E-c, sigma(yc), tensile strain rates and phi(f) were discussed.

Effects of Nano-CaCO3 Content and Surface Treatment on Tensile Properties of PPS/GF Ternary Composites

Tensile Properties of PPS/GF/Nano-CaCO3 Ternary Composites

Study of Mechanical Properties of PPS/GF/Nano-meter CaCO_3 Ternary Composite

Tensile Properties of PPS/PC/GF/Nano-CaCO3 Composites

Impact Toughness and Flexural Properties of Pps/Gf/Nano-Caco3 Ternary Composites

Mechanical Properties of PPS/PC/GF/Nano-CaCO3 Hybrid Composites

Tensile Properties of Polypropylene/Nano-CaCO3 Composites

Crystallization Properties of PPS/GF/Nano-CaCO_3 Ternary Composites

Impact and Bending Properties of PPS/PC/GF/Nano-CaCO3 Composites

Study on Microstructue and Mechanical Properties of Nano CaCO3/PPS Composite

Mechanical Properties of the Nano-Caco3 and GB Co-Reinforced CF/PA6 Composites

Impact Fracture Toughness and Morphology of Polypropylene Nanocomposites

Study on Tensile and Dielectric Properties of GB/PP Composite

Effect of Wet Surface Treated Nano-Sio2 on Mechanical Properties of Polypropylene Composite

Investigations on Nano-CaCO3 Reinforced and Toughening Polypropylene/Elastomer Composites

Heat distortion temperature of PPS/PC blend, PPS/PC nanocomposite and PPS/PC/GF hybrid nanocomposite

Influences Of Tensile Rates And Filler Content On Mechanical Properties For Pp-Gb Composites

Crystallization of Glass Fiber‐reinforced Poly(p‐phenylene Sulfide) Nanocomposites

Effects of the Glass Bead Content and the Surface Treatment on the Mechanical Properties of Polypropylene Composites

Study on Properties of PP/nano-CaCO_3/POE Composite

Effect of Nano-Caco3 on Properties of Pp/Tlcp/Caco3 In-Situ Hybrid Materials